మూస:Routemap

మూస డాక్యుమెంటేషన్[view] [edit] [చరిత్ర] [purge]

This Lua-based template replaces the older parser-function-based {{BS-map}} (and deprecated {{Railway line header}}, {{BS-header}} and {{BS-table}}) templates for Wikipedia:Route diagram templates because diagrams created by {{Routemap}} load faster.

Markup for map parameter

The markup for composing the diagram in {{{map}}} parameter is different than the legacy BS row templates. The major difference is the separators for separating icon IDs and text of each row. There is no need to call new BS row template for each new row because the hard return itself serves as a separator for calling another new table row in the diagram. You can use other supplementary templates like {{rmr}} in the text cell as usual, but be aware that special treatment is required for templates like {{BSsplit}} and {{BSto}} because they are essentially calling another new table for formatting.

Basic

icon id\icon id\icon id~~dist./time~~main text~~remark~~right remark

or

icon id\icon id\icon id~~main text

{{Routemap |title=Example 1 |map= KBHFa~~terminus WASSERq\hWASSER\WASSERq~~ ~~ ~~ ~~Bridge LDER\INT\~~1 km~~station~~transfer for HSR \KBHFe\BUS~~2 km~~terminus~~bus terminal }}

Example 1 terminus Bridge 1 km station transfer for HSR 2 km terminus bus terminal

• The separator between icon IDs uses backslash (\) instead of slash (/ commonly used by XML closing tag).
• After the last icon ID, if there is only one set of "tilde-tilde" (~~), the following text will be displayed in the main text cell instead of dist./time.
• Separating text cells requires at least one empty space, otherwise it will be treated as a signature.

Icon overlay, icon link, background color and colspan

{{Routemap |title=Example 2 |map= -colspan-1 Icon overlay uSTRq!~STR2!~BHF!~lHUB -colspan-2-style=border-bottom:5px solid red; ---- icon link utBHF!@Superhub -colspan ---- background color -colspan-end utSTR~~ ~~ ~~ ~~ ~~bg=#7af }}

Example 2 Icon overlay icon link background color

• Overlay separator "exclamation mark-tilde" (!~) must follow the icon id which is to be overlaid.
• Overlay is practically unlimited, but legibility should be taken into account.
• When using icon overlay and icon link for the same icon cell, the icon link separator (!@) must follow the last (top) overlaying icon id.
• The background color separator (~~bg=) requires 4 sets of preceding text separators to be recognizable even if there is no text on that row whatsoever.

Collapsible

{{Routemap |title=Example 3.1: Basic collapsible |text-width=80 |map= -startCollapsible-collapsed \KBHFa\~~terminus hSTRa@g WASSERq\hWASSER\WASSERq~~ ~~ ~~ ~~bridge hSTRe@f -endCollapsible- LDER\INT\~~ ~~station~~transfer for HSR \KBHFe\BUS~~ ~~terminus~~bus terminal }}

Example 3.1: Basic collapsible terminus bridge station transfer for HSR terminus bus terminal

{{Routemap |title=Example 3.2: Mixed odd and even rows |tw=70 |map= -startCollapsible-collapsed d\KBHFa\d~~terminus hWASSER~~ ~~ ~~ ~~bridge -endCollapsible- BS2+l\BS2+r~~junction }}

Example 3.2: Mixed odd and even rows terminus bridge junction

• Adjust {{{text-width}}} (or tw) parameter until there is no break.
  • Unit "px" by default, but other units such as "em" are acceptable.
  • Check the map in different browser and increase text-width if it breaks.
• The icon number of the first row of collapsible section must equal to or greater than the icon number of the widest non-collapsible row.
  • As in example 3.2, use half width empty icon  (d) as filler when you are mixing both odd and even rows in the same map.
• Change "collapsed" to "nil" will change the default state of the collapible to uncollapsed.

Collapsible replacement

{{Routemap |title=Example 4.1 |text-width=150 |map= KBHFa~~terminus -startCollapsible-collapsed-replace \LSTR\~~dispensable section \hSTRa@g\ WASSERq\hWASSER\WASSERq~~ ~~ ~~ ~~bridge hSTRe@f -endCollapsible- LDER\INT\~~ ~~station~~transfer for HSR \KBHFe\BUS~~ ~~terminus~~bus terminal }}	Example 4.1 terminus dispensable section bridge station transfer for HSR terminus bus terminal
{{Routemap |title=Example 4.2: Empty filler |text-width=150 |map= -startCollapsible-collapsed-replace exCONTg~~under construction leer exKBHFa~~future terminus exBHF~~future station -endCollapsible KBHFxa~~terminus KBHFe~~terminus }}	Example 4.2: Empty filler under construction future terminus future station terminus terminus

• The icon number of both replacement and replaced rows must equal to or greater than the icon number of the widest non-collapsible row.
• If you want to hide the replaced row after expanding the collapsible, use icon  (leer) as empty filler as in example 4.2.
• In any case, mind to provide a sufficient text-width. Using here text-width=120 would break the alignment of the icons.

Dual text cell

left-left remark~~left remark~~left main text~~left dist./time! !icon id~~right dist./time~~right main text~~right remark~~right-right remark

or

left main text! !icon id~~right main text

{{Routemap |title=Example 5 |map= commuter terminus! !uKBHFa\\KBHFa~~regional terminus River Boris~~ ~~ ~~! !uhKRZW\WASSERq\hWASSER~~ ~~ ~~ ~~bridge transfer for HSR~~station~~1 km! !uINT\LDER\LSTR commuter terminus~~2 km! !uKBHFe\\KBHFe~~2 km~~regional terminus }}

Example 5 commuter terminus regional terminus River Boris bridge transfer for HSR station 1 km commuter terminus 2 km 2 km regional terminus

• Left text cells require "exclamation mark-space-exclamation mark" (! !) to separate from icon cells.
• If there is no "tilde-tilde" (~~) separator to the left of "exclamation mark-space-exclamation mark", the text to the left of icon cells will be displayed in left main text cell.

Dual text cell collapsible

{{Routemap |title=Example 6.1: All text cells applied |style=width:540px |text-width=65,150,30,30,120, |map= -startCollapsible commuter terminus! !uKBHFa\leer\KBHFa~~regional terminus River Boris~~ ~~ ~~! !uhKRZW\WASSERq\hWASSER~~ ~~ ~~ ~~bridge -endCollapsible transfer for HSR~~station~~1 km! !uINT\LDER\LSTR commuter terminus~~2 km! !uKBHFe\\KBHFe~~2 km~~regional terminus }}

Example 6.1: All text cells applied commuter terminus regional terminus River Boris bridge transfer for HSR station 1 km commuter terminus 2 km 2 km regional terminus

{{Routemap |map-title=Example 6.2: Only main text cell applied |style=width:380px |text-width=,120,,,120, |map= -startCollapsible commuter terminus! !uKBHFa\\KBHFa~~regional terminus River Boris! !uhKRZW\WASSERq\hWASSER~~bridge -endCollapsible station! !uINT\LDER\LSTR commuter terminus! !uKBHFe\\KBHFe~~regional terminus }}

Example 6.2: Only main text cell applied commuter terminus regional terminus River Boris bridge station commuter terminus regional terminus

• Apply {{{text-width}}} to eliminate the break:
  • Only 1 value: right main text+right remark
  • 3 values, separated by commas: right dist./time,right main text+right remark,right-right remark
  • 6 values: Left-left remark,left remark+left main text,left dist./time,right dist./time,right main text+right remark,right-right remark
  • If the amount of values does not equal to 1, 3 or 6, the whole parameter will be ignored.
• If the text width of right-right remark is shorter to some degree, its width definition can be omitted, as in example 6.1.
• If the entire map never uses a specific text cell, that width definition can be omitted, as in example 6.2.
• Define the general table width in {{{style}}} parameter as well if {{{text-width}}} alone is ineffective to prevent the break.
• If the empty icon cell of the collapsible row is being squashed, use empty icon  (leer) to fixate the icon columns.

BSsplit, BSto, BScvt templates

If you use these templates, the vertical line separator (|) right after the template name must be converted to {{!}} otherwise you will get a mess of unprocessed markups.

{{Routemap |title=Example 7.1: Correct usage |map= BHF~~{{BSsplit{{!}}upper|lower}} }} }}

Example 7.1: Correct usage upper lower

{{Routemap |title=Example 7.2: Wrong usage |map= BHF~~{{BSto{{!}}upper|lower}} }} }}

Transition from legacy BS row template to Routemap markup

All BS row templates have been amended with safesubst commands, hence conversion can be easily done by adding the safesubst: markup before every BS row template name in the map. For example, change {{BS2|STR|BHF|0|1|2|3|O1=uSTRq}} in the map to {{safesubst:BS2|STR|BHF|0|1|2|3|O1=uSTRq}}, then save change, it will produce STR!~uSTRq\BHF~~0~~1~~2~~3. The process can be sped up by using the "replace all" function of advanced edit tool or separate text editor such as Notepad or Notepad++, but the search rule for the BS row templates should be specified to the number of icon columns in order to avoid templates with similar name such as BSto and BSsplit in case they are present in the map.
One can also use an Unix script (mind all non subst-ed templates, that require the {{!}} protection of their first bar. ):

#! /bin/bash

cat <<EOF > tmp_sed 

s¶{{BS-map¶{{Routemap¶
s¶{{kill-BS-map¶{{Routemap¶
s¶{{BSto|¶{{BSto{{!}}¶g
s¶{{BScvt|¶{{BScvt{{!}}¶g
s¶{{BSkm|¶{{BSkm{{!}}¶g
s¶{{BSsplit|¶{{BSsplit{{!}}¶g
s¶{{BS|¶{{subst:BS|¶g
s¶{{BS\\([2-9]\\)|¶{{subst:BS\\1|¶g
s¶{{BS1\\([0-9]\\)|¶{{subst:BS1\\1|¶g
s¶||}}<!--¶|&#32;|}}<!--¶

EOF

sed -f tmp_sed $from > $vers

Fake template kill-BS-map is a trick to choose wich template will not be displayed in an overflown source page

The rule s¶||}}<!--¶|&#32;|}}<!--¶ is required when using #if structures

When using Railway line header to avoid a template overflow, the following additional rules can to be used:

#! /bin/bash
cat <<EOF >> tmp_sed
 
s¶{|{{Railway line header}}¶{{Routemap¶
s¶{|{{Railway line header|collapse={{#if:{{{collapse|}}}|yes}}}}¶{{Routemap | collapse={{#if:{{{collapse|}}}|yes}}¶
s¶{{BS-header|\\([^|][^|]*\\)|*.*}}¶| title = \\1¶
s¶{{BS-table}}¶| map = ¶
s¶|}\\n|}¶}}¶

EOF

Embedding into infobox

• Use {{{inline}}} to remove title bar and table border. If creating a separate template which will be embedded into an infobox, wrap inline=1 in <includeonly> tags. Also {{{navbar pos}}} is helpful to locate the {{Navbar}} better.

{{Infobox station | name = {{colorbox|orange}} Station layout | image = Placeholder.png | image_upright = 0.5 | image_caption = Platform level | opened = {{Start date|1935|05|15|df=y}} | tracks = 2 | route_map = {{routemap|inline=1|navbar=asd|navbar pos=2| KBHFa~~terminus WASSERq\hWSTR\WASSERq~~ ~~ ~~ ~~Bridge LDER\INT\~~1 km~~station~~transfer for HSR \KBHFe\BUS~~2 km~~terminus~~bus terminal }} }}

Station layout Platform level సాధారణ సమాచారం పట్టాలు 2 History Opened 1935 మే 15 (1935-05-15) మూస:Infobox station/services మూస:Infobox station/services మూస:Infobox station/services Route map terminus Bridge 1 km station transfer for HSR 2 km terminus bus terminal

Template data

Template for displaying diagram composed of icon images and text labels in uniform style.

మూస పరామితులు[టెంప్లేట్‌డేటాను నిర్వహించు]

పరామితి		వివరణ	రకం	స్థితి
Inline state	inline	Remove title bar and border for transclusion in infobox అప్రమేయం	స్ట్రింగు	ఐచ్చికం
Table title	title	Official title of the system. Value «no» will remove the table title row, but this will also disable the table collapsible switch as well అప్రమేయం	స్ట్రింగు	ఐచ్చికం
Title font color	title color title-color	Title font color. Use high contrast color to the title background color అప్రమేయం #FFFFFF	స్ట్రింగు	ఐచ్చికం
Title background color	title bg color title-bg	Title background color. Use high contrast color to the title font color అప్రమేయం #27404E	స్ట్రింగు	ఐచ్చికం
Collapsibility	collapsible	Whether the whole infobox is collapsible or not	స్ట్రింగు	ఐచ్చికం
Collapsing state	collapse collapsed	Collapsing state. Shown by default. Any value will make the table collapse by default	స్ట్రింగు	ఐచ్చికం
Template name for Navbar	navbar tnavbar	Type the diagram template page name so the Navbar template will appear and link to the template page అప్రమేయం	స్ట్రింగు	ఐచ్చికం
Position of the Navbar	navbar pos	Position of the Navbar template. Float to left in the title bar by default; «1» for top-right corner of the map (just under the title bar); «2» for the middle bottom of the map అప్రమేయం	స్ట్రింగు	ఐచ్చికం
Legend appearance	legend	Alias of the legend link. It can be «bus», «canal», «footpath» or «track». «0» or «no» for no legend at all అప్రమేయం Template:Railway line legend	పేజీ పేరు	ఐచ్చికం
Legend link text	legend alt	Different link name in place of «Legend» if desirable అప్రమేయం Legend	స్ట్రింగు	ఐచ్చికం
Floating state	float	Floating state of the whole box: «right» by default; optionally «left» or «none» అప్రమేయం right	స్ట్రింగు	ఐచ్చికం
Background color	bg	Background color of the whole map area అప్రమేయం #F9F9F9	స్ట్రింగు	ఐచ్చికం
CSS style values	style	Additional CSS style definition of the whole infobox	స్ట్రింగు	ఐచ్చికం
Top note	top on top	Space for optional note or infobox above the map	స్ట్రింగు	ఐచ్చికం
Bottom note	footnote bottom	Space for optional note or infobox below the map	స్ట్రింగు	ఐచ్చికం
Width of map text cell	text-width tw	Extend the width of the map text cell so the collapsible section within the map does not break అప్రమేయం	స్ట్రింగు	ఐచ్చికం
Map markups	map 1	Map data which uses specific markup/separators to load icon image and arrange the text in the uniform style	స్ట్రింగు	తప్పనిసరి

The above documentation is transcluded from మూస:Routemap/doc. (edit | చరిత్ర)
Editors can experiment in this template's sandbox (create | mirror) and testcases (create) pages.
Add categories to the /doc subpage. Subpages of this template.