Jump to content

మూస:S-line/doc

లంకెలను చేర్చండి
వికీపీడియా నుండి

S-line is a specialised succession box template that links railway station articles.

Note: this template is called by {{s-rail-national}}; an alias. If a change is made which alters/adds parameters names that template must be updated to reflect the new situation.

Usage

[మార్చు]

S-line must be encased within {{s-rail-start}} and {{s-end}}. The use of {{s-rail}} is highly recommended but not required.

S-line has the following parameters:

Parameter Description Notes
system The system to which the line belongs This should correspond to an entry in Template:S-rail/lines
line The name of the line This should be obvious shorthand (e.g. Orange for Orange Line)
previous The name of the previous station
next The name of the next station
type The left-hand line branch Optional
type2 The right-hand line branch Optional
note Information about the left-hand line branch Optional
note2 Information about the right-hand line branch Optional
notemid Information about the station itself Optional
oneway1 Indicates that trains do not operate towards the Previous station Optional
oneway2 Indicates that trains do not operate towards the Next station Optional
rows1, hide1 Used to have the Previous Station box cover multiple lines. See below for details. Optional
rows2, hide2 Used to have the Next Station box cover multiple lines. See below for details. Optional
rowsmid, hidemid Used to have the middle (Line) box cover multiple lines. See below for details. Optional
transfer Used to show lines available by direct transfer at an adjoining station. See below for details. Optional
branch Used to denote specific line branch information, in lieu of or in addition to the type parameters. Optional
state1, state2 Allows the passing of an additional station parameter. Useful for disambiguation. Optional
through1, through2 Allows, instead of a next station, service passing to another line on the system. Optional

Making it work

[మార్చు]

S-line depends on sub-templates for the proper display of information. For an example, here are the templates necessary to properly display this box (a version of which is at Kalamazoo Transportation Center:

అంతకుముందు స్టేషను   భారతీయ రైల్వేలు   తరువాత స్టేషను
Wolverine

First of all, here's the underlying code: 

{{s-rail-start}}
{{s-rail|title=భారతీయ రైల్వేలు}}
{{s-line|system=Indian railway|line=Wolverine|previous=Dowagiac|next=Battle Creek}}
{{s-end}}

Template:S-rail-start is a variant of the generic template {{s-start}} used to begin thousands of succession boxes. Important note: No form of start template ({{s-rail-start}} or {{s-start}}) is needed when the succession box is inside the service parameter of {{Infobox station}}. Template:S-rail is used to generate headings for each grouping of rail services in a box. Here we have only one, but some particularly large terminals may have three or four (see Union Station (Chicago) or 30th Street Station). S-rail uses the translation table at Template:S-rail/lines; if the entry is undefined, it simply links the text. Therefore, Amtrak produces Amtrak, while LUL gives London Underground.

You can see that S-line takes only parameters – no linking necessary! S-line accomplishes this through two assumptions: (1) groups of articles on train stations are named in a predictable manner; (2) redirects are cheap. For S-line to produce the table above five separate templates were defined. Before discussing them, however, let's review the parameters:

  • SYSTEM: The company or grouping to which the line belongs. This is case-sensitive and must be consistent. In this case, the value is Amtrak.
  • LINE: The line name. This is also case-sensitive and must be consistent throughout. Here, we're describing the Wolverine.
  • PREVIOUS and NEXT: The names of the previous and next stations on the line. Current convention suggests West/East Left/Right, followed by North/South, but your mileage may vary. Whenever possible, succession boxes should make geographic sense (i.e. don't have one line running west-east and the other east-west).

You need templates to define the following things: the formatting/linking of the line, the formatting/linking of the previous and next stations, the display of the line's colour, and the display of the appropriate termini – all automatic.

Line

[మార్చు]

[[Template:{{{SYSTEM}}} lines]] (Template:Amtrak lines)

This template carries a translation table for the formatting/linking of the line. The template receives one parameter, {{{1}}} from S-line. With systems that have unusual or non-uniform naming, like Amtrak, it may be necessary to have a test case for every line. The relevant line from Template:Amtrak lines is this: 

| Wolverine=''[[Wolverine (passenger train)|Wolverine]]''

This links to the article on the Wolverine and italicizes the article, appropriate for a named train. This means if the article ever moves, you need only to update switch statement, not individual articles. When a system has uniform naming, you may be able to get away with a default case and only one or two exceptions, as in Template:LUL lines: 

{{#switch:{{{1}}}
 | #default=[[{{{1}}} Line]]
}}

Station

[మార్చు]

[[Template:{{{SYSTEM}}} stations]] (Template:Amtrak stations)

This template carries a translation table for the formatting/linking of the line. The template receives two parameters from S-line, {{{station}}} and {{{line}}}, although use of the latter is not often necessary. Station will be either the PREVIOUS or NEXT parameter; both are handled the same way behind the scenes. The easiest way to start the station template is with the default case that reflects how articles on system stations are named. With Amtrak, it's done this way: 

 | #default=[[{{{station}}} (Amtrak station)|{{{station}}}]]

Therefore, "Dowagiac" produces [[Dowagiac (Amtrak station)|Dowagiac]], all linked and ready to go.

Colour

[మార్చు]

[[Template:{{{SYSTEM}}} color]] (Template:Amtrak color)

Note that colour is spelled the American way in the template; the creator apologizes in advance and it's probably not worth the hassle to change it at this stage. This template is designed the same way as the others except that a default case is rare--lines within a system tend to have a different colour. Amtrak is an important exception, and doesn't even have a switch statement: the template consists only of the hex code: 004670. The pound sign is included within s-line so it isn't necessary. This also forces the use of hex codes; no nouns are permitted (e.g. red, white). The template takes one parameter, {{{1}}}. A good example is found here at Template:SEPTA color: 

{{#switch:{{{1}}}
 | Broad Street=F58735
 | Market-Frankford=0081C4
 | Subway-Surface=5D9842
 | Route 100=993F96
 | Route 101
 | Route 102=AF5F18
 | R1=F9EF02
 | R2=A80058
 | R3=F9812A
 | R5=0255A1
 | R6=049471
 | R7=E63641
 | R8=CF731E
}}

Termini

[మార్చు]
[[:Template:S-line/{{{SYSTEM}}} left/{{{LINE}}}]] (Template:S-line/Amtrak left/Wolverine)
[[:Template:S-line/{{{SYSTEM}}} right/{{{LINE}}}]] (Template:S-line/Amtrak right/Wolverine)

These are the all-important templates which produce the "towards..." part of the templates. They can also get pretty tricky depending on the setup. The Wolverine is an easy example. It runs end-to-end from Chicago, Illinois to Pontiac, Michigan. Therefore, the "left" (westbound) template contains "Chicago" while the "right" (eastbound) template contains "Pontiac". These names are plugged in to the STATION template just as NEXT and PREVIOUS were, with the results that you can see above. A feature of S-line is that if it detects that the next station is the name as the terminus, it will display a note to that effect instead of the destination. Hence, 

{{s-rail-start}}
{{s-rail|title=భారతీయ రైల్వేలు}}
{{s-line|system=భారతీయ రైల్వేలు|line=Wolverine|previous=Chicago|next=Battle Creek}}
{{s-end}}

produces:

అంతకుముందు స్టేషను   భారతీయ రైల్వేలు   తరువాత స్టేషను
మూస:భారతీయ రైల్వేలు lines

Now, let's say we've got a more complicated example, like the Lake Shore Limited, which runs from Chicago east to either Boston or New York. The Limited's "left" template is still a simple line of text – Chicago – but the "right" template needs a switch statement. The left and right templates receive one parameter, {{{type}}}, from s-line, which tells them which termini to return. Here's the Limited's "right" template: {{#switch:{{{type}}} |Both=New York or Boston South |New York=New York |Boston=Boston South }} This allows three eastbound destinations: New York, Boston, or both if the train hasn't reached the junction point yet. A default statement is acceptable here if it is true for disproportionate length of the line. In order to make this work properly, you have to define the concept of "New York or Boston South" in the STATION template, like so: 

 | New York or Boston South=[[Pennsylvania Station (New York City)|New York]] or [[Boston South (Amtrak station)|Boston South]]

Here's a hypothetical example of this at work: 

{{s-rail-start}}
{{s-rail|title=భారతీయ రైల్వేలు}}
{{s-line|system=భారతీయ రైల్వేలు|line=Lake Shore Limited|previous=Chicago|next=Battle Creek|type2=Both}}
{{s-end}}

produces

అంతకుముందు స్టేషను   భారతీయ రైల్వేలు   తరువాత స్టేషను
మూస:భారతీయ రైల్వేలు lines

One-way operation

[మార్చు]

For rail lines that operate in only one direction (such as going around a loop), the oneway1 or oneway2 parameters are used, to indicate that the Previous or Next station, respectively, does not have service going towards it. When these parameters are present with any non-null value, the toward [Terminal] line is replaced with One-way operation. For example, for a CTA station in the Chicago Loop: 

{{s-rail-start}}
{{s-rail|title=CTA}}
{{s-line|system=CTA|line=Brown|previous=Clark/Lake|next=Randolph/Wabash|type=Kimball|oneway2=true}}
{{s-line|system=CTA|line=Green|previous=Clark/Lake|next=Randolph/Wabash|type2=Both}}
{{s-line|system=CTA|line=Orange|previous=Clark/Lake|next=Randolph/Wabash|oneway1=true|type2=Midway|rows1=3}}
{{s-line|system=CTA|line=Purple|previous=Clark/Lake|next=Randolph/Wabash|oneway1=true|type2=Linden|hide1=true}}
{{s-line|system=CTA|line=Pink|previous=Clark/Lake|next=Randolph/Wabash|oneway1=true|type2=54|hide1=true}}
{{s-end}}

Produces the box:

అంతకుముందు స్టేషను   Chicago 'L'   తరువాత స్టేషను
toward Kimball
Brown Line
One-way operation
toward Harlem/Lake
Green Line
One-way operation
Orange Line
toward Midway
Purple Line
toward Linden
Pink Line
toward 54th/Cermak

Parallel lines

[మార్చు]

For lines that operate on the same tracks and serve the same next station and final terminal, the rows1, rows2, hide1, and hide2 optional parameters can be used to have the Previous (the 1s) or Next (the 2s) Station boxes cover more than one line. The rows parameters specify how many lines the station should cover, while the hide parameters ensure that the table formatting remains intact. The two parameters must be used together, with hide specified for every line that is being covered by the first line. An example of this use can be seen in the preceding CTA box. Note that, in the preceding CTA example, the previous and oneway1 parameters could have been omitted from the Purple and Pink line entries, but were left in for consistency's sake.

Another example of this: 

{{S-start}}
{{S-rail|title=LUL}}
{{S-line|system=LUL|line=Circle|previous=Westbourne Park|next=Paddington|type2=Aldgate|rows1=2}}
{{S-line|system=LUL|line=Hammersmith & City|previous=Westbourne Park|next=Paddington|hide1=yes}}
{{S-end}}

Produces:

అంతకుముందు స్టేషను   London Underground   తరువాత స్టేషను
towards Hammersmith
Circle line
towards Edgware Road (via Aldgate)
Hammersmith & City line
towards Barking

Transfers

[మార్చు]

The transfer parameter makes it possible to show within the box lines available at a different station with which there's a direct transfer from the current station. This snippet is taken from the article about the Finchley Road tube station. The North London Line does not actually serve the station itself, but there's an official out of system transfer designated between London Underground services at Finchley Road and London Overground services at the nearby Finchley Road & Frognal station: 

{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Jubilee|previous=West Hampstead|next=Swiss Cottage|type2=one}}
{{s-line|system=LUL|line=Metropolitan|previous=Wembley Park|next=Baker Street|type=Four|rowsmid=2|rows2=2}}
{{s-line|system=LUL|line=Metropolitan|previous=Harrow-on-the-Hill|next=Finchley Road|type=Four|hidemid=yes|hide2=yes|note=Peak periods only}}
{{s-note|text=Out-of-system interchange}}
{{s-rail|title=LOG}}
{{s-line|system=LOG|line=North London|previous=West Hampstead|next=Hampstead Heath|transfer=Finchley Road & Frognal}}
{{s-end}}

Produces:

అంతకుముందు స్టేషను   London Underground   తరువాత స్టేషను
towards Stanmore
Jubilee line
towards Stratford
Metropolitan line
towards Baker Street or Aldgate
Peak periods only
    Out-of-system interchange    
style="vertical-align: middle; width: 30%; border-top: 1px #aaa solid; border-right: 1px #aaa solid; border-left: 0px; border-bottom: 0px; color:#; background-color:#; "|అంతకుముందు style="border-left: 0px none; border-right: 0px none; border-bottom: 0px none; border-top: 1px #aaa solid; background-color:#"|  style="vertical-align: middle; border-top: 1px #aaa solid; border-left: 0px none; border-right: 0px none; border-bottom: 0px none; background-color:#"| London Overground style="border-left: 0px none; border-right: 0px none; border-bottom: 0px none; border-top: 1px #aaa solid; background-color:#"|  style="vertical-align: middle; width: 30%; border-top: 1px #aaa solid; border-left: 1px #aaa solid; border-right: 0px; border-bottom: 0px; color:#; background-color:#; "| తరువాత
toward Richmond
North London Line
toward Stratford

Branches

[మార్చు]

The branch parameter can be used to describe a subset of a line. In the example hereafter, the branch parameter designates four different parts of the MBTA Green Line. When passed to the left and right termini templates, the branch and line parameters identify destinations. Additionally, the branch name is displayed beneath the line name.

Optionally, [[Template:{{{SYSTEM}}} lines/branches]] may be defined, which allows the linking of the branch parameter.

In this example below, the branch template (Template:MBTA lines/branches) is defined, allowing branch linking. Additionally, left and right termini are returned based on the passed branch parameter: 

{{s-rail-start}}
{{s-rail|title=MBTA}}
{{s-line|system=MBTA|line=Green|branch="B" Branch|previous=Copley|next=Boylston|rows2=2}}
{{s-line|system=MBTA|line=Green|branch="D" Branch|previous=Copley|next=|hide2=yes}}
{{s-line|system=MBTA|line=Green|branch="C" Branch|previous=Copley|next=Boylston}}
{{s-line|system=MBTA|line=Green|branch="E" Branch|previous=Copley|next=Boylston}}
{{s-end}}
అంతకుముందు స్టేషను   MBTA   తరువాత స్టేషను
Green Line
toward Riverside
Green Line
Green Line
toward Heath Street
Green Line
toward Lechmere

In this example hereafter, taken from the Acton Town tube station article, the branch template (Template:LUL lines/branches) is defined, allowing branch linking. Additionally, through the branch parameter, the left and right hand terminis are generated. In some cases, a type parameter can be used to supplement the branch parameter. If necessary, a notemid= parameter can be used to substitute for a branch parameter. 

{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=District|previous=Ealing Common|next=Chiswick Park|type=Ealing Broadway|type2=One}}
{{s-line|system=LUL|line=Piccadilly|type=Uxbridge|notemid=[[Piccadilly line#Uxbridge branch|Uxbridge branch]]|previous=Ealing Common|next=Turnham Green|note2=Early morning and late evening service only|rowsmid=2|rows1=2}}
{{s-line|system=LUL|line=Piccadilly|branch=Uxbridge|previous=Ealing Common|next=Hammersmith|hidemid=yes|hide1=yes}}
{{s-line|system=LUL|line=Piccadilly|branch=Heathrow|previous=South Ealing|next=Turnham Green|note2=Early morning and late evening service only|rowsmid=2|rows1=2}}
{{s-line|system=LUL|line=Piccadilly|branch=Heathrow|previous=South Ealing|next=Hammersmith|hidemid=yes|hide1=yes}}
{{s-end}}

produces:

అంతకుముందు స్టేషను   London Underground   తరువాత స్టేషను
District line
Piccadilly line
Early morning and late evening service only
towards Cockfosters
towards Cockfosters
Piccadilly line
Early morning and late evening service only
towards Cockfosters
towards Cockfosters

Styles

[మార్చు]

[[Template:{{{SYSTEM}}} style]] (Template:Amtrak style)

The style template allows the modification, at a system level, of display parameters for inter-related templates, including Template:Infobox Station.

Parameter Description Notes
lang Which version of English to output display in. Specify GB for British; the default is US. If GB is specified, the boxes will say "towards" (station). If US is specified, the boxes will say "toward" (station). Optional; S-line only
name_format Formatting for the {{{name}}} parameter itself Optional; Infobox Station only
showterm A "No" value suppresses the display of termini information Optional; S-line only
stop_noun Type of stop (e.g. station, tram stop); default is "station" Optional; S-rail only
thcolor Font color for table headings Optional; Infobox Station only
thbgcolor Background color for table headings Optional; Infobox Station only
title_nowrap If "yes", will apply the nowrap style to s-rail headings. Not recommended for use within Infobox Station Optional; S-rail only

TemplateData

[మార్చు]
This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:S-line in articles based on its TemplateData.

TemplateData for S-line

S-line is a specialised succession box template that links railway station articles

మూస పరామితులు

పరామితివివరణరకంస్థితి
systemsystem

The system to which the line belongs

స్ట్రింగుతప్పనిసరి
lineline

The name of the line

స్ట్రింగుతప్పనిసరి
previousprevious

The name of the previous station, should correspond to a specific template name

స్ట్రింగుతప్పనిసరి
nextnext

The name of the next station, should correspond to a specific template name

స్ట్రింగుతప్పనిసరి
typetype

The left-hand line branch

స్ట్రింగుఐచ్చికం
type2type2

The right-hand line branch

స్ట్రింగుఐచ్చికం
notenote

Information about the left-hand line branch

స్ట్రింగుఐచ్చికం
notemidnotemid

Information about the station itself

స్ట్రింగుఐచ్చికం
note2note2

Information about the right-hand line branch

స్ట్రింగుఐచ్చికం
oneway1oneway1

Indicates that trains do not operate towards the Previous station

స్ట్రింగుఐచ్చికం
oneway2oneway2

Indicates that trains do not operate towards the Next station

స్ట్రింగుఐచ్చికం
through1through1

Allows, instead of a previous station, service passing to another line on the system.

స్ట్రింగుఐచ్చికం
through2through2

Allows, instead of a next station, service passing to another line on the system.

స్ట్రింగుఐచ్చికం
state1state1

Allows the passing of an additional station parameter. Useful for disambiguation.

స్ట్రింగుఐచ్చికం
state2state2

Allows the passing of an additional station parameter. Useful for disambiguation.

స్ట్రింగుఐచ్చికం
branchbranch

Can be used to describe a subset of a line.

స్ట్రింగుఐచ్చికం
transfertransfer

Used to show lines available by direct transfer at an adjoining station.

స్ట్రింగుఐచ్చికం
round1round1

If set displays 'Reverses direction' in left cell

స్ట్రింగుఐచ్చికం
round2round2

If set displays 'Reverses direction' in right cell

స్ట్రింగుఐచ్చికం
circularcircular

స్ట్రింగుఐచ్చికం
circular1circular1

స్ట్రింగుఐచ్చికం
circular2circular2

స్ట్రింగుఐచ్చికం
rows1rows1

Number of rows for left hand column

స్ట్రింగుఐచ్చికం
rowsmidrowsmid

Number of rows for center hand column

స్ట్రింగుఐచ్చికం
rows2rows2

Number of rows for right hand column

స్ట్రింగుఐచ్చికం
hide1hide1

Hides the previous station, used when a previous row has 'rows1' set

స్ట్రింగుఐచ్చికం
hidemidhidemid

Hides this station, used when a previous row has 'rowsmid' set

స్ట్రింగుఐచ్చికం
hide2hide2

Hides the next station, used when a previous row has 'rows2' set

స్ట్రింగుఐచ్చికం

See also

[మార్చు]


"https://te.wikipedia.org/w/index.php?title=మూస:S-line/doc&oldid=1742105" నుండి వెలికితీశారు