మూస:Convert
This template is used on approximately 12,10,000 pages, or roughly 333% of all pages. To avoid major disruption and server load, any changes should be tested in the template's /sandbox or /testcases subpages, or in your own user subpage. The tested changes can be added to this page in a single edit. Consider discussing changes on the talk page before implementing them. |
See this information on copying this template and modifying it for use on another wiki. |
This template uses Lua: |
Template {{convert}} calculates a measurement value (number × unit) into the same measurement by a different unit, and then presents the results, formatted. The complete list of unit symbols recognized by the template is here.
For example:
{{convert|2|km|mi}}
→ 2 కిలోమీటర్లు (1.2 మై.) (km entered, converted into miles){{convert|7|mi|km}}
→ 7 మైళ్లు (11 కి.మీ.) (mi entered, converted into km)
Numbers can be rounded, units can be abbreviated into symbols:
{{convert|2|km|mi|2|abbr=on}}
→ 2 కి.మీ. (1.24 మై.){{convert|7|mi|km|2|abbr=on}}
→ 7 మై. (11.27 కి.మీ.)
Value ranges can be entered using |to|...
or |-|...
:
{{convert|2|to|5|km|mi}}
→ 2 నుండి 5 కిలోమీటర్లు (1.2 నుండి 3.1 మై.){{convert|2|-|5|km|mi}}
→ 2–5 కిలోమీటర్లు (1.2–3.1 మై.)
Combined effect example:
{{convert|2|-|5|km|mi|2|abbr=on}}
→ 2–5 కి.మీ. (1.24–3.11 మై.){{convert|2|and|5|km|mi|sigfig=3|abbr=off}}
→ 2 -- 5 కిలోమీటర్లు (1.24 -- 3.11 మైళ్లు)
Units to convert
[మార్చు]Enter units to convert from into:
{{convert|1|lb|kg}}
→ 1 పౌను (0.45 కి.గ్రా.)
- SI units generally accept prefixes, like "m" for milli (10−3), and "M" for mega (106)
- For "per" units, use "/" (slash): kg/ha (see § 'per' units: kg/ha and § Currency per unit: $/km)
- For three-unit units, etc., see Category:Convert-like templates
Unit name or symbol (abbreviation): 1 pound or 1 lb?
[మార్చు]By default, the first quantity shows the unit name, the second shows the symbol (or abbreviation):
{{convert|1|lb|kg}}
→ 1 పౌను (0.45 కి.గ్రా.)
Using |abbr=in
shows the symbol for first (left-hand side) unit, and the name instead of the symbol for the second unit:
{{convert|1|lb|kg|abbr=in}}
→ 1 పౌ. (0.45 కిలోగ్రాములు)
To abbreviate both or neither:
{{convert|1|lb|kg|abbr=on}}
→ 1 పౌ. (0.45 కి.గ్రా.){{convert|1|lb|kg|abbr=off}}
→ 1 పౌను (0.45 కిలోగ్రాములు)
Convenience: {{cvt}} has |abbr=on
by default
[మార్చు]Template {{cvt}} is the same as {{convert}}, except that it has |abbr=on
as the default behavior. In {{cvt}}, all other options are available. So:
{{cvt|1|lb|kg}}
→ 1 పౌ. (0.45 కి.గ్రా.)
is equivalent to:
{{convert|1|lb|kg|abbr=on}}
→ 1 పౌ. (0.45 కి.గ్రా.)
Adjective: a 10-mile distance
[మార్చు]Use |adj=on
to produce the adjectival (hyphenated) form:
A {{convert|10|mi|km|adj=on}} distance
→ A 10-మైలు (16 కి.మీ.) distance.
Default behavior, for comparison:
{{convert|10|mi|km}} to go
→ 10 మైళ్లు (16 కి.మీ.) to go.
|adj=on
does not produce hyphens with unit symbols, as per :
A {{convert|9|in|cm|adj=on|abbr=on}} nail
→ A 9 అం. (23 cమీ.) nail.
Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?
[మార్చు]By definition, 100 ft equals 30.48 మీ.. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.
Default rounding
[మార్చు]By {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant digits, whichever is more precise. An exception to this is rounding temperatures (see below).
Examples of rounding | ||
---|---|---|
Input | Displays as | Note |
{{convert|123|ft|m|-1}} |
123 అడుగులు (40 మీ.) | |
{{convert|123|ft|m}} |
123 అడుగులు (37 మీ.) | same output as with 0 (below) |
{{convert|123|ft|m|0}} |
123 అడుగులు (37 మీ.) | |
{{convert|123|ft|m|1}} |
123 అడుగులు (37.5 మీ.) | |
{{convert|123|ft|m|2}} |
123 అడుగులు (37.49 మీ.) | The more-exact value is 37.4904 m or so, which gets converted to 37 m if this parameter is not specified at all. |
{{convert|500|ft|m|-1}} |
500 అడుగులు (150 మీ.) | |
{{convert|500|ft|m}} |
500 అడుగులు (150 మీ.) | same output as with -1 (above), because the conversion factor is between 0.2 and 2 (hence, it should produce same double-zero precision (−2) as in the input value), but the conversion must produce two significant digits at a minimum (hence, a higher single-zero precision (−1) is used)
|
{{convert|500|ft|m|0}} |
500 అడుగులు (152 మీ.) | |
{{convert|500|ft|m|1}} |
500 అడుగులు (152.4 మీ.) | |
{{convert|500|ft|m|2}} |
500 అడుగులు (152.40 మీ.) | exact value is 152.4 m |
{{convert|500|ft|cm|-3}} |
500 అడుగులు (15,000 cమీ.) | |
{{convert|500|ft|cm}} |
500 అడుగులు (15,000 cమీ.) | same output as with -3 (above), because the conversion factor is between 20 and 200 (hence, it should decrease input value's double-zero precision (−2) by 2), but the conversion must produce two significant digits at a minimum (hence, a higher triple-zero precision (−3) is used)
|
{{convert|500|ft|cm|0}} |
500 అడుగులు (15,240 cమీ.) |
Convert supports four types of rounding:
Round to a given precision: use a precision number
[మార్చు]Specify the desired precision with an integer as the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of ⅟10 to the power of this integer. For instance, if the result is 8621 and the rounding parameter is "−2", 8600 will be displayed. If the result is "123.456" and the parameter is "0", 123 will be displayed. Essentially a positive or zero rounding parameter specifies the number of decimal places; a negative value specifies the number of trailing zeroes.
Round to a given number of significant figures: |sigfig=
[మార్చు]To specify the output number to be with n significant figures use |sigfig=<number>
:
{{convert|1200|ft|m|sigfig=4}}
→ 1,200 అడుగులు (365.8 మీ.){{convert|1200|ft|m|sigfig=3}}
→ 1,200 అడుగులు (366 మీ.){{convert|1200|ft|m|sigfig=2}}
→ 1,200 అడుగులు (370 మీ.){{convert|1200|ft|m|sigfig=1}}
→ 1,200 అడుగులు (400 మీ.)
Default behavior, for comparison:
{{convert|1200|ft|m}}
→ 1,200 అడుగులు (370 మీ.)
Setting |sigfig=
to a value less than 1 is meaningless:
{{convert|1200|ft|m|sigfig=0}}
→ 1,200 అడుగులు (370 మీ.)*
Round to a multiple of 5: 15, 20, 25, ...
[మార్చు]Using |round=5
rounds the outcome to a multiple of 5.
{{convert|10|m|ft}}
→ 10 మీటర్లు (33 అ.){{convert|10|m|ft|round=5}}
→ 10 మీటర్లు (35 అ.)
Similar: using |round=25
rounds the outcome to a multiple of 25.
{{convert|10|m|ft}}
→ 10 మీటర్లు (33 అ.){{convert|10|m|ft|round=25}}
→ 10 మీటర్లు (25 అ.)
Default behavior, for comparison:
{{convert|10|m|ft|sigfig=4}}
→ 10 మీటర్లు (32.81 అ.)
In a range, one can round each value individually to the default. Use |round=each
:
{{convert|10 x 200 x 3000|m|ft}}
→ 10 by 200 by 3,000 మీటర్లు (33 అ. × 656 అ. × 9,843 అ.){{convert|10 x 200 x 3000|m|ft|round=each}}
→ 10 by 200 by 3,000 మీటర్లు (33 అ. × 660 అ. × 9,800 అ.)
Round to a multiple of a given fraction: 2 3⁄16 inch
[మార్చు]Specify the desired denominator using |frac=<some positive integer>
. (Denominator is the below-the-slash number, for example the 3 in ⅓).
{{convert|5.56|cm|in|frac=16}}
→ 5.56 సెంటీమీటర్లు (2+3⁄16 అం.){{convert|8|cm|in|frac=4}}
→ 8 సెంటీమీటర్లు (3+1⁄4 అం.)
The fraction is reduced when possible:
{{convert|8|cm|in|frac=100}}
→ 8 సెంటీమీటర్లు (3+3⁄20 అం.)
Default behavior uses decimal notation:
{{convert|5.56|cm|in}}
→ 5.56 సెంటీమీటర్లు (2.19 అం.)
Rounding temperatures: °C, °F and K
[మార్చు]In temperatures, the conversion will be rounded either to the precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.
{{convert|10,000|C|F K}}
→ 10,000 °C (18,000 °F; 10,300 K){{convert|10,000.1|C|F K}}
→ 10,000.1 °C (18,032.2 °F; 10,273.2 K){{convert|-272|C|F K}}
→ −272 °C (−457.60 °F; 1.15 K){{convert|-272|C}}
→ −272 °C (−457.60 °F){{convert|100|C|F K}}
→ 100 °C (212 °F; 373 K){{convert|0|C|F K}}
→ 0 °C (32 °F; 273 K)
The precision of the input number in example (1) is one digit, but the precision of its kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 0.1 degrees Celsius change is a 0.18 degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow.
Result (1) seems off until you set the significant figures yourself with |sigfig=
:
{{convert|10000|C|sigfig=5}}
→ 10,000 °C (18,032 °F)
or you set the precision positionally, relative to the decimal point (zero being at the decimal point):
{{convert|10000|C|0}}
→ 10,000 °C (18,032 °F)
The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is six now, whereas before kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the kelvins conversion generated the fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the kelvins conversion.
Rounding input
[మార్చు]There is limited support for rounding the displayed input number. The rounding takes place after conversion, so the output is based on the full-precision input. This is useful when the input is produced by {{#expr:}}
or otherwise available to a higher precision than is usefully displayed, and it's desirable to avoid double-rounding.
To round the input to a specified number of digits after the decimal point, use one of the parameters:
|adj=ri0
|adj=ri1
|adj=ri2
|adj=ri3
Note that it is not possible to round above the decimal place (|adj=ri-1
). Neither is there support for significant figures, multiples of 5, or any other output-rounding feature.
The default precision is computed based on the input, so an explicit output precision must usually be supplied:
{{convert|4.14159|mi|km|adj=ri0}}
→ 4 మైళ్లు (6.66524 కి.మీ.) (precisions are mismatched){{convert|4.14159|mi|km|0|adj=ri0}}
→ 4 మైళ్లు (7 కి.మీ.)
In this case, if the input were rounded before conversion, a different result would be obtained:
{{convert|{{#expr:4.14159 round 0}}|mi|km|0}}
→ 4 మైళ్లు (6 కి.మీ.) (rounds intermediate calculation, giving a different result)
Into multiple units: 10 °C (50 °F; 283 K)
[మార్చు]Separate the multiple output units by a space:
{{convert|10|C|F K}}
→ 10 °C (50 °F; 283 K){{convert|5|km|mi nmi}}
→ 5 కిలోమీటర్లు (3.1 మై.; 2.7 nmi)
If the output unit names contain spaces, use +
as the separator.
See also:
- For multiple-unit options like 1 ft 5 in, see § In input and § In output.
Ranges of values
[మార్చు]A range converts two values and separates them by your choice of words and punctuation.
A range: 6 to 17 kg (13 to 37 lb)
[మార్చు]Range indicators are entered as the second parameter (between the values). Range separators can be:
Separator | Convert | Result | Notes |
---|---|---|---|
-
|
{{convert|3|-|6|ft}}
|
3–6 అడుగులు (0.91–1.83 మీ.) | Input can be hyphen (-) or en dash (–), output uses en dash |
– – (en dash)
|
{{convert|3|–|6|ft}}
|
3–6 అడుగులు (0.91–1.83 మీ.) | |
and
|
{{convert|3|and|6|ft}}
|
3 -- 6 అడుగులు (0.91 -- 1.83 మీ.) | |
and(-)
|
{{convert|3|and(-)|6|ft}}
|
3 and 6 అడుగులు (0.91–1.83 మీ.) | |abbr=on abbreviates the first unit
|
and(-)|abbr=on
|
{{convert|3|and(-)|6|ft|abbr=on}}
|
3 and 6 అ. (0.91–1.83 మీ.) | |
or
|
{{convert|3|or|6|ft}}
|
3 లేక 6 అడుగులు (0.91 లేక 1.83 మీ.) | |
to
|
{{convert|3|to|6|ft}}
|
3 నుండి 6 అడుగులు (0.91 నుండి 1.83 మీ.) | |
to(-)
|
{{convert|3|to(-)|6|ft}}
|
3 నుండి 6 అడుగులు (0.91–1.83 మీ.) | |abbr=on abbreviates the first unit
|
to(-)|abbr=on
|
{{convert|3|to(-)|6|ft|abbr=on}}
|
3 నుండి 6 అ. (0.91–1.83 మీ.) | |
to about
|
{{convert|3|to about|6|ft}}
|
3 to about 6 అడుగులు (0.91 to about 1.83 మీ.) | |
+/-
|
{{convert|3|+/-|6|ft}}
|
3 ± 6 అడుగులు (0.91 ± 1.83 మీ.) | |
± ±
|
{{convert|3|±|6|ft}}
|
3 ± 6 అడుగులు (0.91 ± 1.83 మీ.) | |
+
|
{{convert|3|+|6|ft}}
|
3 + 6 అడుగులు (0.91 + 1.83 మీ.) | |
,
|
{{convert|3|,|6|ft}}
|
3, 6 అడుగులు (0.91, 1.83 మీ.) | |
, and
|
{{convert|3|, and|6|ft}}
|
3, 6 అడుగులు (0.91, 1.83 మీ.) | |
, or
|
{{convert|3|, or|6|ft}}
|
3, లేక 6 అడుగులు (0.91, లేక 1.83 మీ.) | |
by
|
{{convert|3|by|6|ft}}
|
3 x 6 అడుగులు (0.91 x 1.83 మీ.) | |
x
|
{{convert|3|x|6|ft}}
|
3 by 6 అడుగులు (0.91 మీ. × 1.83 మీ.) | |abbr=on abbreviates and repeats the first unit
|
× ×
|
{{convert|3|×|6|ft}}
|
3 by 6 అడుగులు (0.91 మీ. × 1.83 మీ.) | |
x|abbr=on
|
{{convert|3|x|6|ft|abbr=on}}
|
3 అ. × 6 అ. (0.91 మీ. × 1.83 మీ.) | |
xx
|
|xx| is deprecated. Use |x| instead | ||
*
|
|*| is deprecated. Use |x| instead |
Multiple dimensions: 6 మీ. × 12 మీ. (20 అ. × 39 అ.)
[మార్చు]Use by
:
{{convert|6|by|12|ft|m}}
→ 6 x 12 అడుగులు (1.8 x 3.7 మీ.)
Use ×
, multiplication sign, or x
, letter:
{{convert|6|x|12|m|ft}}
→ 6 by 12 మీటర్లు (20 అ. × 39 అ.)
In science, the formal way is to set |x|
and |abbr=on
(keeping dimensions right, like in area = x km2):
{{convert|6|x|12|m|ft|abbr=on}}
→ 6 మీ. × 12 మీ. (20 అ. × 39 అ.)
Lists of values: 20, 40, or 60 miles
[మార్చు]{{convert|20|,|40|, or|60|mi}}
→ 20, 40, లేక 60 మైళ్లు (32, 64, లేక 97 కి.మీ.)
About feet, inch in ranges and multiples
[మార్చు]While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:
{{convert|1|ft|3|in|x|3|ft|5|in|mm}}
→ 1 అడుగు 3 అంగుళాలు ([convert: unknown unit])*
Default behavior, for comparison:
{{convert|1|ft|3|in|mm}}
→ 1 అడుగు 3 అంగుళాలు (380 mమీ.)
However, converting metric units into feet and inches with |order=flip
can produce the desired output:
{{convert|380|x|1040|mm|ftin|order=flip}}
→ 1 అడుగు 3 అంగుళాలు by 3 అడుగులు 5 అంగుళాలు (380 mమీ. × 1,040 mమీ.)
Words
[మార్చు]Spelling of unit name: international metre or US meter?
[మార్చు]Default spelling of units is in the en (generic) locale. To show en-US spelling, use |sp=us
:
{{convert|1|m|ft}}
→ 1 మీటరు (3.3 అ.)—default{{convert|1|m|ft|sp=us}}
→ 1 మీటరు (3.3 అ.)
Spell out numbers: ten miles
[మార్చు]To write a number in words, use |spell=in
:
{{convert|10|mi|m|spell=in}}
→ ten మైళ్లు (16,000 మీ.)
To spell out both in and out values, use |spell=on
:
{{convert|10|mi|m|spell=on}}
→ ten మైళ్లు (sixteen thousand మీటర్లు)
To make first letter a capital, use |spell=In
, |spell=On
{{convert|10|mi|m|spell=In}}
→ Ten మైళ్లు (16,000 మీ.){{convert|10|mi|m|spell=On}}
→ Ten మైళ్లు (sixteen thousand మీటర్లు)
Remember that the spelling of the units (ft, m) is independently set by |abbr=
. To the extreme:
{{convert|10|mi|m|spell=on|abbr=off|sp=us}}
→ ten మైళ్లు (sixteen thousand మీటర్లు)
Inserted before units: 4 planted acres
[మార్చు]{{convert|4|acre||adj=pre|planted}}
→ 4 planted ఎకరాలు (1.6 హె.)
disp=preunit
is similar, but has no separator after the specified text, and can have different text for the output value:
{{convert|4|acre||disp=preunit|planted }}
→ 4 planted ఎకరాలు (1.6 planted హె.){{convert|4|acre||disp=preunit|planted |reforested-}}
→ 4 planted ఎకరాలు (1.6 reforested-హె.)
After adjective unit: A 10-అడుగు-long corridor
[మార్చు]Note that two units (in this case, ft and m) are required. Use with just one unit will generate an error message.
{{convert|10|ft|m|adj=mid|-long}}
→ 10-అడుగు-long (3.0 మీ.)
Plurals: 1 inch, 2 inches
[మార్చు]The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.
{{convert|1|metre}}
→ 1 మీటరు (3 అ. 3 అం.){{convert|2|metre}}
→ 2 మీటర్లు (6 అ. 7 అం.){{convert|2|metre|abbr=on}}
→ 2 మీ. (6 అ. 7 అం.)
- Exception
Entering the unit "foot" instead of "ft" forces singular output "foot", whatever the number is.
{{convert|100|foot|abbr=off}}
→ 100 అడుగులు (30 మీటర్లు)
Fractions: one-eighth of an imperial pint
[మార్చు]The convert template also supports spelling out fractions.
{{convert|3+1/2|oz|g|spell=in}}
→ three and a half ounces (99 గ్రా.)
Any additional words needed for the fraction can also be added at the end of the template.
{{convert|1/8|imppt|ml|spell=in|adj=pre|of an}}
→ one-eighth of an imperial pint (71 ml)
Wrapping and line breaking
[మార్చు]Spelling out "thousands", "millions", etc.
[మార్చు]Most unit codes accept a prefix of e3 (thousand) or e6 (million) or e9 (billion).
{{convert|100|e6mi|e6km}}
→ 100 మిలియన్ మైళ్లు (160×10 6 కి.మీ.){{convert|120|e6acre}}
→ 120 మిలియన్ ఎకరాలు (490,000 కి.మీ2){{convert|120|e6acre|e3km2}}
→ 120 మిలియన్ ఎకరాలు (490×10 3 కి.మీ2)
To display both input and output in scientific notation, use |abbr=on
{{convert|100|e6mi|e6km|abbr=on}}
→ 100×10 6 మై. (160×10 6 కి.మీ.)
To spell out "thousands", "millions", etc., |abbr=unit
abbreviates the unit; |abbr=off
displays both full unit names.
{{convert|100|e6mi|e6km|abbr=unit}}
→ 100 మిలియన్ మై. (160 మిలియన్ కి.మీ.){{convert|100|e6mi|e6km|abbr=off}}
→ 100 మిలియన్ మైళ్లు (160 మిలియన్ కిలోమీటర్లు)
Numbers
[మార్చు]Using an SI prefix: gigametre (Gm), or micrometre (μm)
[మార్చు]Text | Symbol | Factor |
---|---|---|
quetta | Q | 1030 |
ronna | R | 1027 |
yotta | Y | 1024 |
zetta | Z | 1021 |
exa | E | 1018 |
peta | P | 1015 |
tera | T | 1012 |
giga | G | 109 |
mega | M | 106 |
kilo | k | 103 |
hecto | h | 102 |
deca | da | 101 |
(none) | 1 | |
deci | d | 10−1 |
centi | c | 10−2 |
milli | m | 10−3 |
micro | μ | 10−6 |
nano | n | 10−9 |
pico | p | 10−12 |
femto | f | 10−15 |
atto | a | 10−18 |
zepto | z | 10−21 |
yocto | y | 10−24 |
ronto | r | 10−27 |
quecto | q | 10−30 |
Units can have an SI prefix like G
before the unit: Gm
, and giga
before the name: gigametre
. These are plain multiplication factors.
To illustrate, these are trivial calculations (from metre to metre), showing the multiplication factor:
- 12 Gమీ. (1.2×1010 మీ.)
- 12 μమీ. (1.2×10−5 మీ.)
The prefix can be added before the SI unit (here: unit m
for metre):
{{convert|12|Gm|mi|abbr=on}}
→ 12 Gమీ. (7,500,000 మై.)Mm
: 12 Mమీ. (7,500 మై.)km
: 12 కి.మీ. (39,000 అ.)mm
: 12 mమీ. (0.47 అం.)μm
: 12 μమీ. (0.012 mమీ.)um
: 12 μమీ. (0.012 mమీ.) (letter "u" can be used for "μ" here)
The prefix can be used in the output unit:
{{convert|12000|mi|Mm|abbr=on}}
→ 12,000 మై. (19 Mమీ.){{convert|12|in|μm|abbr=on}}
→ 12 అం. (300,000 μమీ.)
As an exception, the non-SI unit "inch" can have the "μ" prefix too:
{{convert|12|μm|μin|abbr=on}}
→ 12 μమీ. (470 μin)
Engineering notation: 7 × 106 m
[మార్చు]In the unit: e6m
[మార్చు]Engineering notation can be entered as a "prefix" to the unit:
{{convert|70|e6m}}
→ 70×10 6 మీ. (230,000,000 అ.)
The same is possible for the output unit:
{{convert|23,000,000|ft|e6m}}
→ 23,000,000 అడుగులు (7.0×10 6 మీ.)
Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:
e3
(thousand),e6
(million),e9
(billion),e12
(trillion),e15
(quadrillion).
Scientific notation: 1.23 × 10−14
[మార్చు]In scientific notation, a number is written like 1.23×10−14. The plain number has exactly one digit before the decimal point.
With {{convert}}, the input can be in e-notation such as 12.3e4
. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.
{{convert|12.3e-15|atm|atm|abbr=on}}
→ 12.3×10−15 atm (1.23×10−14 atm){{convert|0.00000005|atm|atm|abbr=on}}
→ 0.00000005 atm (5.0×10−8 atm)
Input with fractions: 1+1⁄2 అంగుళాలు (38.1 mమీ.)
[మార్చు]The number to convert can be written in fractions. Both /
(keyboard slash) and ⁄
(fraction slash) are accepted:
{{convert|1/2|in|mm|1}}
→ 1⁄2 అంగుళం (12.7 mమీ.){{convert|1⁄2|in|mm|1}}
→ 1⁄2 అంగుళం (12.7 mమీ.)
With positive mixed numbers (a positive integer and a fraction), use a +
sign
{{convert|2+1⁄2|in|mm|1}}
→ 2+1⁄2 అంగుళాలు (63.5 mమీ.)
With negative mixed numbers, use a hyphen -
and repeat it:
{{convert|-2-1⁄2|in|mm|1}}
→ −2+1⁄2 అంగుళాలు (−63.5 mమీ.)
Note that the following cases are not interpreted as mixed numbers:
{{convert|2-1⁄2|in|mm|1}}
→ 2–1⁄2 అంగుళం (50.8–12.7 mమీ.). This is interpreted as a range from 2 inches to 1⁄2 inch.{{convert|-2+1⁄2|in|mm|1}}
→ [convert: invalid number] This is neither a mixed number nor a range, and mathematical expressions requiring calculations are not allowed here.{{convert|2+½|in|mm|1}}
→ [convert: invalid number] Fractions consisting of a single Unicode character are not allowed either.
Horizontal fraction bar: 1/2 inch
[మార్చు]Using a double slash (//
) provides a horizontal fraction bar for the original (input) unit:
{{convert|1//2|in|mm|1}}
→ 1/2 అంగుళం (12.7 mమీ.){{convert|6+3//8|in|mm|1}}
→ 6+3/8 అంగుళాలు (161.9 mమీ.)
Using a negative value for |frac=
provides a horizontal fraction bar for the converted (output) unit:
{{convert|12.7|mm|frac=-2}}
→ 12.7 మిల్లీమీటర్లు (1/2 అం.){{convert|161.9|mm|frac=-8}}
→ 161.9 మిల్లీమీటర్లు (6+3/8 అం.)
Thousands separator: 1,000 mi లేదా 1000 mi
[మార్చు]In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:
{{convert|1234567|m|ft}}
→ 1,234,567 మీటర్లు ([convert: unknown unit]){{convert|1,234,567|m|ft}}
→ 1,234,567 మీటర్లు ([convert: unknown unit])
Set |comma=off
to remove the separator from the output:
{{convert|1234567|m|ft|comma=off}}
→ 1234567 మీటర్లు (4050417 అ.)
Use |comma=gaps
to use digit grouping by gap (thin space) as a thousands separator:
{{convert|1234567|m|ft|comma=gaps}}
→ 1234567 మీటర్లు (4050417 అ.)
Default behavior, for comparison:
{{convert|1234567|m|ft}}
→ 1,234,567 మీటర్లు (4,050,417 అ.)
Setting |comma=5
will only add the separator when the number of digits is 5 or more:
{{convert|1234|m|ft|comma=5}}
→ 1234 మీటర్లు (4049 అ.){{convert|1234567|m|ft|comma=5}}
→ 1,234,567 మీటర్లు (4,050,417 అ.)
Default behavior, for comparison:
{{convert|1234|m|ft}}
→ 1,234 మీటర్లు (4,049 అ.)
Output manipulation
[మార్చు]Brackets and separators: 10 m [33 ft]
[మార్చు]Punctuation that distinguishes the two measurements is set by |disp=
.
Options are: b
(the default), sqbr
, comma
, or
, br
, br()
, x|…
:
{{convert|10|m|ft|disp=sqbr}}
→ 10 మీటర్లు [33 అ.]{{convert|10|m|ft|disp=comma}}
→ 10 మీటర్లు, 33 అ.{{convert|10|m|ft|disp=or}}
→ 10 మీటర్లు or 33 అడుగులు
Default behavior, for comparison:
{{convert|10|m|ft}}
→ 10 మీటర్లు (33 అ.)
Setting |disp=br
will force a new line (<br/>
)
{{convert|10|m|ft|disp=br}}
→ 10 మీటర్లు
33 అడుగులు
Also |disp=br()
will force a new line, and keep the brackets (useful in tables):
{{convert|10|m|ft|disp=br()}}
→ 10 మీటర్లు
(33 అడుగులు)
Setting |disp=x|…
allows any text as separator:
{{convert|10|m|ft|disp=x|_MyText_}}
→ 10 మీటర్లు_MyText_33 అ. (To display spaces, use
)
Flipping (reordering) the two measurements: 1,609.3 మీటర్లు (1 మైలు)
[మార్చు]Setting |order=flip
will flip (swap) the two measurements:
{{convert|1|mi|m|order=flip}}
→ 1,609.3 మీటర్లు (1 మైలు)
Default behavior, for comparison:
{{convert|1|mi|m}}
→ 1 మైలు (1,609.3 మీటర్లు)
When converting to multiple units, the effect is:
{{convert|10|km|mi nmi|order=flip}}
→ 6.2137 మైళ్లు; 5.3996 nautical miles (10 కిలోమీటర్లు){{convert|10|km|nmi mi|order=flip}}
→ 5.3996 nautical miles; 6.2137 మైళ్లు (10 కిలోమీటర్లు)
Fixed ordering of output units: 212 °F (100 °C; 373 K)
[మార్చు]Setting |order=out
shows the output-units as ordered; the input unit is skipped:
{{convert|100|C|F C K|abbr=on|order=out}}
→ 212 °F (100 °C; 373 K){{convert|200|PS|kW hp|0|abbr=on|order=out}}
→ 147 కి.W (197 hp)
See also: § Displaying parts of the output.
Displaying parts of the result: 2 (1.5)
[మార్చు]It is possible to display only parts of the conversion result: The following examples show how to display only a part of the result.
- Note: in Convert, abbr is synonym for unit symbol
Convert | Returns | Components |
---|---|---|
{{convert|2|cuyd|m3}}
|
2 cubic yards (1.5 మీ3) | all (default conversion) |
{{convert|2|cuyd|m3|abbr=on}}
|
2 cu yd (1.5 మీ3) | all (default conversion, abbr) |
{{convert|2|cuyd|m3|abbr=values}}
|
2 (1.5) | numbers only |
{{convert|2|cuyd|m3|disp=unit}}
|
cubic yards | input unit |
{{convert|2|cuyd|m3|disp=unit|adj=on}}
|
cubic-yard | input unit, adjectival (hyphenated) |
{{convert|2|cuyd|m3|disp=unit|adj=on|abbr=on}}
|
cu yd | input unit, adjectival (abbr so not hyphenated) |
{{convert|2|cuyd|m3|disp=unit|abbr=on}}
|
cu yd | input unit abbr |
{{convert|2|cuyd|m3|disp=out}}
|
1.5 మీ3 | output value, symbols |
{{convert|2|cuyd|m3|disp=out|abbr=off}} |
1.5 ఘనపు మీటరుs | output value, names |
{{convert|2|cuyd|m3|disp=out|adj=on}} |
1.5-ఘనపు-మీటరు | output, adjective |
{{convert|2|cuyd|m3|disp=number}} |
1.5 | output number |
{{convert|2|cuyd|m3|disp=unit2}} |
మీ3 | output unit (abbr by default) |
{{convert|2|cuyd|m3|disp=unit2|abbr=off}} |
ఘనపు మీటరుs | output unit (name) |
{{convert|2|cuyd|m3|disp=unit2|abbr=on}} |
మీ3 | output unit (abbr) |
Display both input name and symbol: 2 kilopascals [kPa]
[మార్చు]Setting |abbr=~
returns both name and symbol of the first (input) unit:
{{convert|2|kPa|psi|abbr=~}}
→ 2 కిలోpascals [కి.Pa] (0.29 psi)A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure
→ A 2-కిలోpascal [కి.Pa] (0.29 psi) pressure
Table options
[మార్చు]For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.
Enforced line break
[మార్చు]|disp=br
adds a line-break and omits brackets.
|disp=br()
adds a line-break and does add brackets to the converted value. This may be useful in tables:
|disp=br |
|disp=br()
|
---|---|
100 కిలోమీటర్లు 62 మైళ్లు |
100 కిలోమీటర్లు (62 మైళ్లు) |
Table columns
[మార్చు]Using {convert} in a table cell, with |disp=table
splits the result over two (or more) columns. By default units are not included in the table, however, they can be added using the |abbr=
parameter. Multiple-unit outputs, like ftin
, always output their units to the table.
{{convert|10|m|ft|disp=table}}
→
style="text-align:right;"|10
|style="text-align:right;"|33
|disp=tablecen
does the same, and also centers the text:
{{convert|20|m|ft|disp=tablecen}}
→
style="text-align:center;"|20
|style="text-align:center;"|66
The units are added as a column header:
kilograms pounds stone and pounds |disp=table
10 22 1 st 8 పౌ. |disp=table
and|abbr=on
20 కి.గ్రా. 44 పౌ. 3 st 2 పౌ. |disp=table
and|abbr=off
30 కిలోగ్రాములు 66 పౌన్లు 4 stone 10 పౌన్లు |disp=tablecen
40 88 6 st 4 పౌ. |disp=<other>
(default)50 కిలోగ్రాములు (110 పౌ.; 7 st 12 పౌ.)
Sorting
[మార్చు]Use |sortable=on
to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:
{{convert|10|m|ft|sortable=on}}
→<span data-sort-value="7001100000000000000♠"></span>10 metres (33 ft)
- showing: 10 మీటర్లు (33 అ.).
Use both |disp=table
and |sortable=on
together to produce table columns (pipe symbols) for each value in sortable columns:
m m ft A 15.75 మీ. 15+3⁄4 52 B 15.5 మీ. 15.5 51 C 16 మీ. 16.0 52.5 D 16 మీ. 16 52
The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.
Units
[మార్చు]The conversion factors and physical constants are sourced here.
All units
[మార్చు]The table below lists units supported by {{convert}}. More complete lists are linked for each dimension. For a complete list of all dimensions, see full list of units.
{{Convert}} uses unit-codes, which are similar to, but not necessarily exactly the same as, the usual written abbreviation for a given unit. These unit-codes are displayed in column 3 of the following tables. These are accepted as input by {{convert}} as the second and third unnamed parameters:
{{convert|100|kg|lb}}
→ 100 కిలోగ్రాములు (220 పౌ.){{convert|100|lb|kg}}
→ 100 పౌన్లు (45 కి.గ్రా.)
The unit-codes should be treated as case-sensitive:
{{convert|100|Mm|mm}}
→ 100 మెగామీటర్లు (1.0×1011 mమీ.)
The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the pipe separator). Typical combination output units are listed below in column 7.
{{convert|55|nmi|km mi}}
→ 55 nautical miles (102 కి.మీ.; 63 మై.){{convert|1|oz|ozt g gr}}
→ 1 ounce (0.91 ozt; 28 గ్రా.; 440 gr)
Some units have alternative unit-codes. These are shown in brackets in column 3, e.g. °F
(F
). Either may be entered for Fahrenheit (but not a lower-case f).
Abridged list of supported units | |||||||
---|---|---|---|---|---|---|---|
Explanation | |||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
the system(s) to which the unit belongs | units listed by name | unit-code to use in template | symbols shown in output | other notes about the units | sample of the default conversion for the unit | output codes for multiple conversions
| |
AREA (Full list) | |||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
SI | చదరపు కిలోమీటరు | km2 | కి.మీ2 | US spelling: square kilometer |
1.0 కి.మీ2 (0.39 చ. మై.) |
| |
చదరపు మీటరు | m2 | మీ2 | US spelling: square meter |
1.0 మీ2 (11 sq ft) |
| ||
చదరపు సెంటీమీటరు | cm2 | cమీ2 | US spelling: square centimeter |
1.0 cమీ2 (0.16 sq in) |
| ||
చదరపు మిల్లీమీటరు | mm2 | mమీ2 | US spelling: square millimeter |
1.0 mమీ2 (0.0016 sq in) |
| ||
non-SI metric | హెక్టారు | ha | హె. | 1.0 హె. (2.5 ఎకరం) | |||
Imperial & US customary |
చదరపు మైలు | sqmi | చ. మై. | 1.0 చ. మై. (2.6 కి.మీ2) |
| ||
ఎకరం | acre | (none) | 1.0 ఎకరం (0.40 హె.) | ||||
square yard | sqyd | sq yd | 1.0 sq yd (0.84 మీ2) | ||||
square foot | sqft (sqfoot) |
sq ft | long code "sqfoot" outputs square foot (and never feet) | 1.0 sq ft (0.093 మీ2) |
| ||
square inch | sqin | sq in | 1.0 sq in (6.5 cమీ2) |
| |||
Other | square nautical mile | sqnmi | sq nmi | 1.0 sq nmi (3.4 కి.మీ2; 1.3 చ. మై.) | |||
dunam | dunam | (none) | For alternative spellings and definitions see the full list | 1.0 dunam (0.0010 కి.మీ2; 0.00039 చ. మై.) | |||
tsubo | tsubo | (none) | 1.0 tsubo (3.3 మీ2) |
| |||
DENSITY | |||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
Metric | kilogram per cubic metre | kg/m3 | kg/m3 | 1.0 kg/m3 (1.7 lb/cu yd) |
| ||
గ్రాము per ఘనపు మీటరు | g/m3 | గ్రా./మీ3 | 1.0 గ్రా./మీ3 (0.0017 lb/cu yd) |
| |||
Imperial & US customary |
pound per cubic foot | lb/ft3 | lb/cu ft | 1.0 lb/cu ft (0.016 గ్రా./cమీ3) |
| ||
pound per cubic yard | lb/yd3 | lb/cu yd | 1.0 lb/cu yd (0.59 kg/m3) |
| |||
ENERGY (Full list) | |||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
SI | గిగాjoule | GJ | GJ | 1.0 GJ (280 kWh) | |||
మెగాjoule | MJ | MJ | 1.0 MJ (0.28 kWh) | ||||
కిలోjoule | kJ | కి.J | 1.0 కి.J (240 cal) | ||||
hectojoule | hJ | hJ | 1.0 hJ (24 cal) | ||||
డెకాjoule | daJ | daJ | 1.0 daJ (2.4 cal) | ||||
joule | J | J | 1.0 J (0.24 cal) | ||||
డెసీjoule | dJ | dJ | 1.0 dJ (0.024 cal) | ||||
సెంటీjoule | cJ | cJ | 1.0 cJ (0.0024 cal) | ||||
మిల్లీjoule | mJ | mJ | 1.0 mJ (0.00024 cal) | ||||
మైక్రోjoule | μJ (uJ) | μJ | 1.0 μJ (2.4×10−7 cal) | ||||
నానోjoule | nJ | nJ | 1.0 nJ (2.4×10−10 cal) | ||||
cgs | megaerg | Merg | Merg | 1.0 Merg (0.10 J) | |||
kiloerg | kerg | kerg | 1.0 kerg (0.10 mJ) | ||||
erg | erg | (none) | 1.0 erg (0.10 μJ) | ||||
Watt-hour multiples | terawatt-hour | TWh | TWh | 1.0 TWh (3.6 PJ) | |||
TW.h | TW⋅h | ||||||
gigawatt-hour | GWh | GWh | 1.0 GWh (3.6 TJ) | ||||
GW.h | GW⋅h | ||||||
megawatt-hour | MWh | MWh | 1.0 MWh (3.6 GJ) | ||||
MW.h | MW⋅h | ||||||
kilowatt-hour | kWh | kWh | 1.0 kWh (3.6 MJ) | ||||
kW.h | kW⋅h | ||||||
watt-hour | Wh | Wh | 1.0 Wh (3.6 కి.J) | ||||
W.h | W⋅h | ||||||
Electron- volt multiples | |||||||
gigaelectronvolt | GeV | GeV | 1.0 GeV (0.16 nJ) | ||||
megaelectronvolt | MeV | MeV | 1.0 MeV (0.16 pJ) | ||||
kiloelectronvolt | keV | keV | 1.0 keV (0.16 fJ) | ||||
electronvolt | eV | eV | 1.0 eV (0.16 aJ) | ||||
millielectronvolt | meV | meV | 1.0 meV (0.16 zJ) | ||||
Calorie multiples | calorie | Cal | Cal | The thermo-chemical calorie is the default definition. For others, see the full list. | 1.0 Cal (4.2 కి.J) | ||
megacalorie | Mcal | Mcal | 1.0 Mcal (4.2 MJ) | ||||
kilocalorie | kcal | kcal | 1.0 kcal (4.2 కి.J) | ||||
calorie | cal | cal | 1.0 cal (4.2 J) | ||||
millicalorie | mcal | mcal | 1.0 mcal (4.2 mJ) | ||||
pound/ ounce-foot/ inch-hour-minute-second |
foot-poundal | ftpdl | ft⋅pdl | 1.0 ft⋅pdl (0.042 J) | |||
foot-pound force | ftlbf | ft⋅lbf | 1.0 ft⋅lbf (1.4 J) | ||||
ftlb-f | ft⋅lbf | ||||||
inch-pound force | inlbf | in⋅lbf | 1.0 in⋅lbf (110 mJ) | ||||
inlb-f | in⋅lbf | ||||||
inch-ounce force | inozf | in⋅ozf | 1.0 in⋅ozf (7.1 mJ) | ||||
inoz-f | in⋅ozf | ||||||
horsepower-hour | hph | hp⋅h | 1.0 hp⋅h (0.75 kWh) | ||||
British thermal unit | British thermal unit | Btu | Btu | The International Steam Table British thermal unit is used. For others, see the full list. | 1.0 Btu (1.1 కి.J) | ||
BTU | BTU | ||||||
TNT-based units | gigatonne of TNT | GtTNT | (none) | 1.0 gigatonne of TNT (4.2 EJ) | |||
gigaton of TNT | GtonTNT | (none) | |||||
megatonne of TNT | MtTNT | (none) | 1.0 megatonne of TNT (4.2 PJ) | ||||
megaton of TNT | MtonTNT | Mt | |||||
kilotonne of TNT | ktTNT | (none) | 1.0 kilotonne of TNT (4.2 TJ) | ||||
kiloton of TNT | ktonTNT | kt | |||||
tonne of TNT | tTNT | (none) | 1.0 tonne of TNT (4.2 GJ) | ||||
ton of TNT | tonTNT | (none) | |||||
Other | |||||||
Hartree | Eh | Eh | 1.0 Eh (27 eV) | ||||
rydberg | Ry | Ry | 1.0 Ry (14 eV) | ||||
tonne of oil equivalent | toe | toe | 1.0 toe (42 GJ) | ||||
barrel of oil equivalent | BOE | BOE | 1.0 BOE (6.1 GJ) | ||||
cubic foot of natural gas | cuftnaturalgas (cufootnaturalgas) | Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural. | 1.0 cubic foot of natural gas (1.1 MJ)
| ||||
FORCE (Full list) | |||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
SI | గిగాnewton | GN | GN | Allows triple output units. See: full list. | 1.0 GN (220,000,000 lbf) |
| |
మెగాnewton | MN | MN | Allows triple output units. See: full list. | 1.0 MN (220,000 lbf) |
| ||
కిలోnewton | kN | కి.N | Allows triple output units. See: full list. | 1.0 కి.N (220 lbf) |
| ||
newton | N | N | 1.0 N (0.22 lbf) |
| |||
మిల్లీnewton | mN | mN | 1.0 mN (0.0036 ozf) |
| |||
మైక్రోnewton | μN (uN) | μN | 1.0 μN (0.0016 grf) |
| |||
నానోnewton | nN | nN | 1.0 nN (1.6×10−6 grf) |
| |||
cgs | megadyne | Mdyn | Mdyn | 1.0 Mdyn (2.2 lbf) | |||
kilodyne | kdyn | kdyn | 1.0 kdyn (0.036 ozf) | ||||
dyne | dyn (dyne) |
dyn | 1.0 dyn (0.016 grf) | ||||
millidyne | mdyn | mdyn | 1.0 mdyn (1.6×10−5 grf) | ||||
Metric gravitational units | tonne-force | t-f | tf | 1.0 tf (9.8 కి.N; 0.98 LTf; 1.1 STf) | |||
tf | tf | ||||||
kilogram-force | kg-f | kgf | 1.0 kgf (9.8 N; 2.2 lbf) | ||||
kgf | kgf | ||||||
gram-force | g-f | gf | 1.0 gf (9.8 mN; 0.035 ozf) | ||||
gf | gf | ||||||
milligram-force | mg-f | mgf | 1.0 mgf (9.8 μN; 0.015 grf) | ||||
mgf | mgf | ||||||
Avoirdupois-based units | poundal | pdl | pdl | 1.0 pdl (0.14 N) | |||
long ton-force | LT-f | LTf | 1.0 LTf (10.0 కి.N) |
| |||
LTf | long ton-force |
| |||||
short ton-force | ST-f | STf | 1.0 STf (8.9 కి.N) |
| |||
STf | short ton-force |
| |||||
pound-force | lb-f | lbf | 1.0 lbf (4.4 N) | ||||
lbf | lbf | ||||||
grain-force | gr-f | grf | 1.0 grf (640 μN) | ||||
grf | grf |
| |||||
LENGTH (Full list) | |||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
SI | మెగామీటరు | Mm | Mమీ. | US spelling: megameter |
1.0 Mమీ. (620 మై.) | ||
కిలోమీటరు | km | కి.మీ. | US spelling: kilometer |
1.0 కి.మీ. (0.62 మై.) |
| ||
మీటరు | m | మీ. | US spelling: meter |
1.0 మీ. (3 అ. 3 అం.) |
| ||
సెంటీమీటరు | cm | cమీ. | US spelling: centimeter |
1.0 cమీ. (0.39 అం.) |
| ||
మిల్లీమీటరు | mm | mమీ. | US spelling: millimeter |
1.0 mమీ. (0.039 అం.) |
| ||
మైక్రోమీటరు | μm (um) | μమీ. | US spelling: micrometer |
1.0 μమీ. (3.9×10−5 అం.) | |||
నానోమీటరు | nm | nమీ. | US spelling: nanometer |
1.0 nమీ. (3.9×10−8 అం.) | |||
non-SI metric | ångström | Å (angstrom) |
Å | 1.0 Å (3.9×10−9 అం.) | |||
Imperial & US customary |
మైలు | mi | మై. | 1.0 మై. (1.6 కి.మీ.) |
| ||
furlong | furlong | (none) | 1.0 furlong (660 అ.; 200 మీ.) | ||||
chain | chain | (none) | 1.0 chain (66 అ.; 20 మీ.) | ||||
rod | rd | rd | For other names of this unit see the full list. | 1.0 rd (17 అ.; 5.0 మీ.) | |||
fathom | fathom | (none) | fathom ≡ 6 ft | 1.0 fathom (6.0 అ.; 1.8 మీ.) | |||
yard | yd | yd | assumes the international definition | 1.0 yd (0.91 మీ.) | |||
అడుగు | ft (foot) | అ. | long code "foot" outputs foot (and never feet)
Use of ′ and ″ symbols violates MOSNUM so is not provided. |
1.0 అ. (0.30 మీ.) |
| ||
అంగుళం | in | అం. | Use of ′ and ″ symbols violates MOSNUM so is not provided. | 1.0 అం. (25 mమీ.) |
| ||
Other | nautical mile | nmi | nmi | the international standard nautical mile For other nautical miles see the full list. |
1.0 nmi (1.9 కి.మీ.; 1.2 మై.) | ||
parsec | pc | pc | 1.0 pc (3.3 ly) | ||||
light-year | ly | ly | 1.0 ly (63,000 AU) | ||||
astronomical unit | AU | AU | 1.0 AU (150,000,000 కి.మీ.; 93,000,000 మై.) |
| |||
MASS (Full list) | |||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
SI | కిలోగ్రాము | kg | కి.గ్రా. | Allows triple output units. See: full list. | 1.0 కి.గ్రా. (2.2 పౌ.) |
| |
గ్రాము | g | గ్రా. | 1.0 గ్రా. (0.035 oz) |
| |||
మిల్లీగ్రాము | mg | mగ్రా. | 1.0 mగ్రా. (0.015 gr) |
| |||
మైక్రోగ్రాము | μg (ug) | μగ్రా. | 1.0 μగ్రా. (1.5×10−5 gr) | ||||
non-SI metric | టన్ | t | ట. | Allows triple output units. See: full list. | 1.0 ట. (0.98 long tons; 1.1 short tons) |
| |
మెట్రిక్ టన్ | MT | ట. |
| ||||
Avoirdupois | long ton | LT | (none) | 2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list. |
1.0 long ton (1.0 ట.) |
| |
long ton | long ton | ||||||
short ton | ST | (none) | 2,000 lb used mostly in the US. Allows triple output units. See: full list. |
1.0 short ton (0.91 ట.) |
| ||
short ton | short ton | ||||||
stone | st | st | 14 lb used mostly in the British Commonwealth except Canada. Allows triple output units. See: full list. |
1.0 st (14 పౌ.; 6.4 కి.గ్రా.) |
| ||
పౌను | lb | పౌ. | Allows triple output units. See: full list. | 1.0 పౌ. (0.45 కి.గ్రా.) |
| ||
ounce | oz | oz | 1.0 oz (28 గ్రా.) |
| |||
drachm | drachm | (none) | 1.0 drachm (1.8 గ్రా.) | ||||
drachm | dram | (none) | |||||
grain | gr | gr | equivalent to the troy grain | 1.0 gr (0.065 గ్రా.) | |||
Troy | troy ounce | ozt | ozt | 1.0 ozt (1.1 oz; 31 గ్రా.) | |||
other | క్యారట్ | carat | (none) | 1.0 క్యారట్ (0.20 గ్రా.) |
| ||
SPEED (Full list) | |||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
SI | metre per second | m/s | m/s | US spelling: meter per second |
1.0 m/s (3.3 ft/s) |
| |
non-SI metric | kilometre per hour | km/h | km/h | US spelling: kilometer per hour |
1.0 km/h (0.62 mph) |
| |
Imperial & US customary |
mile per hour | mph | mph | 1.0 mph (1.6 km/h) |
| ||
foot per second | ft/s (foot/s) | ft/s | long code "foot/s" outputs foot per second (and never feet) | 1.0 ft/s (0.30 m/s) |
| ||
Maritime units | knot | kn (knot) | kn | 1.0 kn (1.9 km/h; 1.2 mph) |
| ||
TEMPERATURE (Full list) | |||||||
system | unit | unit- code |
symbol | notes | sample default conversion |
combination output units | |
SI | K | K | K | Allows triple output units. See: full list. | 1.0 K (−272.15 °C; −457.87 °F) |
| |
°C | °C (C) | °C | 1.0 °C (33.8 °F) |
| |||
Imperial & US customary |
°R | °R (R) | °R | 1.0 °R (0.556 K; −458.670 °F; −272.594 °C) |
| ||
°F | °F (F) | °F | 1.0 °F (−17.2 °C) |
| |||
Celsius change | C-change | Used for temperature intervals instead of actual temperatures Example: {{convert|5|C-change|0}} warmer Result: 5 °C (9 °F) warmer | |||||
Fahrenheit change | F-change | Used for temperature intervals instead of actual temperatures Example: {{convert|10|F-change|0}} colder Result: 10 °F (6 °C) colder
| |||||
TORQUE (Full list) | |||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
Industrial | |||||||
SI | newton metre | Nm | N⋅m | Triple combinations are also possible. See the full list. | 1.0 N⋅m (0.74 lbf⋅ft) |
| |
Non-SI metric | kilogram metre | kg.m | kg⋅m | 1.0 kg⋅m (9.8 N⋅m; 7.2 lb⋅ft) |
| ||
Imperial & US customary |
pound force-foot | lb.ft | lb⋅ft | 1.0 lb⋅ft (1.4 N⋅m) |
| ||
Scientific | |||||||
SI | newton metre | N.m | N⋅m | Triple combinations are also possible. See the full list. | 1.0 N⋅m (0.74 lbf⋅ft) |
| |
Non-SI metric | kilogram force-metre | kgf.m | kgf⋅m | 1.0 kgf⋅m (9.8 N⋅m; 7.2 lbf⋅ft) |
| ||
Imperial & US customary |
pound force-foot | lbf.ft | lbf⋅ft | 1.0 lbf⋅ft (1.4 N⋅m) |
| ||
VOLUME (Full list) | |||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
SI | ఘనపు మీటరు | m3 | మీ3 | US spelling: cubic meter one kilolitre |
1.0 మీ3 (35 ఘ.అ.) | ||
ఘనపు సెంటీమీటరు | cm3 | cమీ3 | US spelling: cubic centimeter one millilitre |
1.0 cమీ3 (0.061 cu in) | |||
cc | cc | ||||||
ఘనపు మిల్లీమీటరు | mm3 | mమీ3 | US spelling: cubic millimeter |
1.0 mమీ3 (6.1×10−5 cu in) | |||
non-SI metric | కిలోlitre | kl | కి.l | US spelling: kiloliter one cubic metre |
1.0 కి.l (35 ఘ.అ.) | ||
kL | కి.L | ||||||
litre | l | L | US spelling: liter one cubic decimetre Allows triple output units. See: full list. |
1.0 L (0.22 imp gal; 0.26 US gal) |
| ||
L | L |
| |||||
సెంటీlitre | cl | cl | US spelling: centiliter |
1.0 cl (0.35 imp fl oz; 0.34 US fl oz) | |||
cL | cL | ||||||
మిల్లీlitre | ml | ml | US spelling: milliliter one cubic centimetre |
1.0 ml (0.035 imp fl oz; 0.034 US fl oz) |
| ||
mL | mL |
| |||||
Imperial & US customary |
cubic yard | cuyd | cu yd | 1.0 cu yd (0.76 మీ3) | |||
ఘనపు అడుగ | cuft (cufoot) | ఘ.అ. | long code "cufoot" outputs cubic foot (and never feet) | 1.0 ఘ.అ. (0.028 మీ3) | |||
cubic inch | cuin | cu in | 1.0 cu in (16 cమీ3) | ||||
Imperial | imperial barrel | impbbl | imp bbl | 36 imp gal | 1.0 imp bbl (160 L; 36 imp gal; 43 US gal) | ||
imperial bushel | impbsh | imp bsh | 8 imp gal | 1.0 imp bsh (36 L; 8.0 imp gal; 8.3 US dry gal) | |||
impbu | imp bu | ||||||
imperial gallon | impgal | imp gal | 4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list. |
1.0 imp gal (4.5 L; 1.2 US gal) |
| ||
imperial quart | impqt | imp qt | 1/4 imp gal or 40 imp fl oz | 1.0 imp qt (1,100 ml; 38 US fl oz) | |||
imperial pint | imppt | imp pt | 1/8 imp gal or 20 imp fl oz | 1.0 imp pt (0.57 L) | |||
imperial fluid ounce | impoz (impfloz) | imp fl oz | 1/160 imp gal | 1.0 imp fl oz (28 ml; 0.96 US fl oz) |
| ||
US customary liquid measure |
US barrel | USbbl | US bbl | 31½ US gal used for liquids except for oil and beer (see the full list) |
1.0 US bbl (120 L; 32 US gal; 26 imp gal) | ||
U.S.bbl | U.S. bbl | ||||||
barrel | oilbbl | bbl | 42 US gal | 1.0 bbl (0.16 మీ3) | |||
US beer barrel | USbeerbbl (usbeerbbl) |
US bbl | 1.0 US bbl (120 L; 31 US gal; 26 imp gal) | ||||
U.S.beerbbl (usbeerbbl) |
U.S. bbl | ||||||
US gallon | USgal | US gal | 231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list. |
1.0 US gal (3.8 L; 0.83 imp gal) |
| ||
U.S.gal | U.S. gal |
| |||||
US quart | USqt | US qt | 1/4 US gal or 32 US fl oz | 1.0 US qt (950 ml) | |||
U.S.qt | U.S. qt | ||||||
US pint | USpt | US pt | 1/8 US gal or 16 US fl oz | 1.0 US pt (0.47 L; 0.83 imp pt) | |||
U.S.pt | U.S. pt | ||||||
US fluid ounce | USoz (USfloz) |
US fl oz | 1/128 US gal | 1.0 US fl oz (30 ml) |
| ||
U.S.oz (U.S.floz) |
U.S. fl oz |
| |||||
US customary dry measure |
US dry barrel | USdrybbl | US dry bbl | 105/32 US bsh | 1.0 US dry bbl (0.12 మీ3) | ||
U.S.drybbl | U.S. dry bbl | ||||||
US bushel | USbsh | US bsh | 2150.42 cubic inches by definition | 1.0 US bsh (35 L; 8.0 US dry gal; 7.8 imp gal) | |||
U.S.bsh | U.S. bsh | ||||||
US bushel | USbu | US bu | 2150.42 cubic inches by definition | 1.0 US bu (35 L; 8.0 US dry gal; 7.8 imp gal) | |||
U.S.bu | U.S. bu | ||||||
US dry gallon | USdrygal | US dry gal | 1/8 US bsh Allows triple output units. See: full list. |
1.0 US dry gal (4.4 L) |
| ||
U.S.drygal | U.S. dry gal |
| |||||
US dry quart | USdryqt | US dry qt | 1/32 US bsh | 1.0 US dry qt (1,100 ml) | |||
U.S.dryqt | U.S. dry qt | ||||||
US dry pint | USdrypt | US dry pt | 1/32 US bsh | 1.0 US dry pt (550 ml) | |||
U.S.drypt | U.S. dry pt |
| |||||
PRESSURE (Full list) | |||||||
unit | unit- code |
symbol or abbrev. |
sample default conversion |
||||
గిగాpascal | GPa | GPa | 1.0 GPa (150,000 psi) | ||||
మెగాpascal | MPa | MPa | 1.0 MPa (150 psi) | ||||
కిలోpascal | kPa | కి.Pa | 1.0 కి.Pa (0.15 psi) | ||||
hectopascal | hPa | hPa | 1.0 hPa (0.015 psi) | ||||
pascal | Pa | Pa | 1.0 Pa (0.00015 psi) | ||||
మిల్లీpascal | mPa | mPa | 1.0 mPa (1.5×10−7 psi) | ||||
millibar | mbar | mbar | 1.0 mbar (1.0 hPa) | ||||
mb | mb | ||||||
decibar | dbar | dbar | 1.0 dbar (10 కి.Pa) | ||||
bar | bar | (none) | 1.0 bar (100 కి.Pa) | ||||
kilobarye | kBa | kBa | 1.0 kBa (1.0 hPa) | ||||
barye | Ba | Ba | 1.0 Ba (0.10 Pa) | ||||
standard atmosphere | atm | atm | 1.0 atm (100 కి.Pa) | ||||
torr | Torr | Torr | 1.0 Torr (0.13 కి.Pa) | ||||
millimetre of mercury | mmHg | mmHg | 1.0 mmHg (0.13 కి.Pa) | ||||
inch of mercury | inHg | inHg | 1.0 inHg (3.4 కి.Pa) | ||||
pound per square inch | psi | psi | 1.0 psi (6.9 కి.Pa) | ||||
FUEL EFFICIENCY | |||||||
unit | unit- code |
notes | combinations | ||||
kilometres per litre | km/l (km/L) | Use km/L to get "km/L"
|
| ||||
litres per 100 kilometres | l/100 km (L/100 km) | Use L/100 km to get "L/100 km"
|
| ||||
litres per kilometre | l/km (L/km) | Use L/km to get "L/km"
|
| ||||
miles per imperial gallon | mpgimp |
| |||||
miles per US gallon | mpgus (mpgUS, mpgU.S.) | Use mpgUS to get "US"Use |
| ||||
imperial gallons per mile | impgal/mi |
| |||||
US gallons per mile | usgal/mi (USgal/mi, U.S.gal/mi) | As above with the us vs US vs U.S.
|
| ||||
The mpgUS , mpgU.S. , USgal/mi vs U.S.gal/mi , km/L , L/100 km and L/km variants work within combinations also (making 36 combinations in total).
| |||||||
POPULATION DENSITY | |||||||
unit | unit- code |
notes | combinations | ||||
inhabitants per square kilometre | PD/km2 | PD stands for population density, i.e. humans (inhabitants)
|
| ||||
per square kilometre | /km2 | Used when the word 'inhabitants' would be inappropriate. |
| ||||
inhabitants per hectare | PD/ha |
| |||||
per hectare | /ha |
| |||||
inhabitants per square mile | PD/sqmi | PD stands for population density, i.e. humans (inhabitants)
|
| ||||
per square mile | /sqmi | Used when the word 'inhabitants' would be inappropriate. |
| ||||
inhabitants per acre | PD/acre |
| |||||
per acre | /acre |
| |||||
COST PER UNIT MASS | |||||||
unit | unit- code |
notes | combinations | ||||
dollars per pound | $/lb | "$" can mean US$, HK$, etc. |
| ||||
dollars per kilogram | $/kg |
| |||||
dollars per troy ounce | $/ozt | 12 troy ounces in 1 troy pound |
|
'per' units: kg/ha, miles per gallon
[మార్చు]When using a slash (/
), a unit like kg/ha
is recognized as kilograms per hectare and will be converted in to other mass/area units. A unit in the numerator is not required.
{{convert|1000|kg/ha}}
→ 1,000 కిలోగ్రాములు per హెక్టారు (890 పౌ./ఎకరం){{convert|350|/in2}}
→ 350 per square inch (54/cm2)
Population density (inhabitants per square mile) can be converted using
{{convert|10|PD/sqmi|PD/km2}}
→ 10 inhabitants per square mile (3.9/km2)
Vehicular fuel efficiency, commonly expressed in miles per gallon లేదా litres per 100 km can also be converted
{{convert|26|mpgUS|l/100km mpgimp}}
→ 26 మైళ్లు per US gallon (9.0 L/100 కి.మీ.; 31 mpg‑imp)
Units of difference: Expressing a change or difference in temperature
[మార్చు]We have already discussed standard temperature conversions (°C, °F, K), as shown in these two examples:
{{convert|10|C}}
→ 10 °C (50 °F) (standard temperature conversion){{convert|10|-|15|C}}
→ 10–15 °C (50–59 °F) (standard temperature range conversion)
When expressing a temperature change (e.g., "The temperature increased by 10 °C"), or when comparing temperatures (e.g., "10 to 15 °C warmer"), we cannot use the standard temperature units (|C
, |F
and |K
), which refer to points on the respective scale. Instead, we must use one of the following "units of difference": |C-change
, |F-change
and |K-change
.
Compare the following two examples with the two above:
{{convert|10|C-change}}
→ 10 °C (18 °F) increase in temperature{{convert|10|-|15|C-change}}
→ 10–15 °C (18–27 °F) warmer than normal
To produce multiple units in the output:
{{convert|10|C-change|F-change K-change}}
→ 10 °C (18 °F; 10 K) difference
Multiple units: 1 ft 5 in
[మార్చు]In input
[మార్చు]Base document § Input multiples lists options for multiple unit input (like ft,in
). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):
{{convert|1|yd|2|ft|3|in}}
→ 1 yard 2 అడుగులు 3 అంగుళాలు (1.60 మీ.){{convert|2|ft|3|in|cm}}
→ 2 అడుగులు 3 అంగుళాలు (69 cమీ.){{convert|1|lb|5|oz|g}}
→ 1 పౌను 5 ounces (600 గ్రా.)
In output
[మార్చు]Available multiple-unit output options predefined, like ftin
and ydftin
. The full list is at § Output multiples.
{{convert|2|m|ftin}}
→ 2 మీటర్లు (6 అ. 7 అం.){{convert|2|m|ft in}}
→ 2 మీటర్లు (6.6 అ.; 79 అం.), using a space, returns the decimal point
Default behavior, for comparison:
{{convert|2|m}}
→ 2 మీటర్లు (6 అ. 7 అం.)
See also:
Currency per unit: $/mi → $/km
[మార్చు]Using currency symbols in a $ per unit value, you can convert the per-unit:
{{convert|10|$/mi|$/km}}
→ $10 per మైలు ($6.2/కి.మీ.){{convert|1500|$/ozt|$/g}}
→ $1,500 per troy ounce ($48/గ్రా.)
You can set the currency in both values using |$=€
:
{{convert|10|$/mi|$/km|$=€}}
→ €10 per మైలు (€6.2/కి.మీ.)
It is not possible to convert the currency. So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km)
Using convert inside templates
[మార్చు]For usage in template code, like infoboxes, {{Convert}} has these options:
- Pre-formatting fraction input
- Module:Convert/helper can read regular input and pre-format it into {{Convert}}-accepted input.
- Your template can accept
|input=16 7/8
and use {{#invoke:Convert/helper|number|16 7/8}} → 16+7/8
- Using a Wikidata property
- Adding the Wikidata property code, like code
|input=P2073
, to your template code automatically returns the Wikidata property for that article, and convert it. Both number and unit are read.
Note: to return that property value for an other article, use |qid=
.
Example for (P2073) of మూస:Convert (Q6271187):
{{convert|input=P2073|qid={{get QID|Cessna 208 Caravan}}|ftin|abbr=on}}
→{{convert|input=P2073|qid=Q1056131|km|abbr=on}}
→ 1,500 మై. (2,400 కి.మీ.){{convert|input=P2073|qid=Q1056131|km|abbr=on|disp=out}}
→ 2,400 కి.మీ.
- For example see template:Infobox Telescope.
Sometimes a property may have more than one value against it in Wikidata. You can use the |qual=
parameter to specify which of the values you want to use.
Example for వ్యాసం (P2386):
Note: this example uses |qid=Q1513315
(testing for (Q1513315))
- (Q613628):
{{convert|input=P2386|qual=Q613628|ft|abbr=on}}
→ 10.0 మీ. (32.8 అ.) - (Q1395645):
{{convert|input=P2386|qual=Q1395645|ft|abbr=on}}
→ 1 మీ. (3.3 అ.)
Parameter list
[మార్చు]Parameter | Value | Description | Note |
---|---|---|---|
|abbr=in |
in
|
Use symbol for first (left-hand side) unit | Unit display |
|abbr=off |
off
|
Use name for all units | Unit display |
|abbr=none |
none
| ||
|abbr=on |
on
|
Use symbol for all units | Unit display |
|abbr=out |
out
|
Use symbol for right-hand side unit (default) | Unit display |
|abbr=unit |
unit
|
Use symbol for all units when using scientific notation | Unit display |
|abbr=values |
values
|
Omit both the input and output units: show only the numbers | Unit display |
|abbr=~ |
~
|
Shows both unit name and symbol | Unit display |
|adj=mid|… |
mid
|
User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter.
|
Word adding, adjective |
|adj=on |
on
|
Unit name is adjective (singular and hyphenated) | Grammar, adjective |
|adj=pre|… |
pre
|
User-specified text before input unit. Expects 1 unnamed parameter. | Word adding |
|adj=ri0 |
ri0
|
Round input with precision 0 | Input precision |
|adj=ri1 |
ri1
|
Round input with precision 1 | Input precision |
|adj=ri2 |
ri2
|
Round input with precision 2 | Input precision |
|adj=ri3 |
ri3
|
Round input with precision 3 | Input precision |
|comma=5 |
5
|
Only use comma for thousands separator if 5 or more digits | Number format |
|comma=gaps |
gaps
|
Use gaps (space), not comma, for thousands separator | Number format |
|comma=off |
off
|
No thousands separator | Number format |
|disp=b |
b
|
Join input and output using " (...)" (default) | Join values |
|disp=sqbr |
sqbr
|
Join input and output using " [...]" | Join values |
|disp=br |
br
|
Join input and output using "<br/>" | Join values |
|disp=comma |
comma
|
Join input and output using ", " | Join values |
|disp=or |
or
|
Join input and output using " or " | Join values |
|disp=number |
number
|
Display output number only | Parts only |
|disp=output number only |
output number only
| ||
|disp=out |
out
|
Display only output number and name/symbol | Parts only |
|disp=output only |
output only
| ||
|disp=preunit|…[|…] |
preunit
|
Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters. | Word adding |
|disp=table |
table
|
Output is suitable for a table cell with align="right" | Table columns |
|disp=tablecen |
tablecen
|
Output is suitable for a table cell with align="center" | Table columns |
|disp=unit |
unit
|
Display input name/symbol only (not input number, not output) | Parts only |
|disp=unit2 |
unit2
|
Display output name/symbol only (not input; not output number) | Parts only |
|disp=x|… |
x
|
Join input and output using user-specified text | Word adding |
|frac=N |
N
|
Show imperial number in fractions, denominator=N | Number format, fraction |
|input=P2048 |
P2048 (e.g.)
|
Reads and converts Wikidata property | Inside template |
|lk=in |
in
|
Link left-hand side unit name or symbol | Unit link |
|lk=on |
on
|
Link all unit names or symbols (but not twice for the same unit) | Unit link |
|lk=out |
out
|
Link right-hand side unit name or symbol | Unit link |
|order=flip |
flip
|
Inverts order of input, output measurements (conversion first) | Order |
|order=out |
out
|
Displays output units in the order entered, skipping input unit | Order |
|qid=Q1056131 |
Q1056131 (e.g.)
|
Reads Wikidata property from Wikidata item | Inside template; testing |
|qual=Q613628 |
Q613628 (e.g.)
|
Qualify Wikidata property | |
|round=5 |
5
|
Rounds calculation to the nearest multiple of 5 | Output precision |
|round=25 |
25
|
Rounds calculation to the nearest multiple of 25 | Output precision |
|round=each |
each
|
In a range, each number is rounded by the default rounding | Output precision |
|sigfig=N |
N
|
Round output number to N significant figures (N is a positive integer) | Output precision |
|sortable=on |
on
|
Adds invisible sort key | Table sort |
|sp=us |
us
|
Use U.S. spelling ("meter" instead of default "metre") | Spelling U.S. names |
|spell=in |
in
|
Spell input number in words | Spelling numbers |
|spell=In |
In
|
Spell input number in words with first letter uppercase | Spelling numbers |
|spell=on |
on
|
Spell input and output numbers in words | Spelling numbers |
|spell=On |
On
|
Spell input and output numbers in words with first letter uppercase | Spelling numbers |
|$=€ |
€
|
Replace $-sign with a currency sign, for example in €/hectare
|
Cost per unit No currency conversion happens |
|debug=yes |
yes
|
Debugging only. In a sortable table: show the normally hidden sort key | Table sort |
|disp=flip |
flip
|
Deprecated. Use |order=flip | Order |
|sing= |
Deprecated. Use |adj= | Plurals |
Deprecated options
[మార్చు]Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.
- disp=flip is deprecated. Use order=flip instead
- sing= is deprecated in any situation. Use adj= instead
- Range separator |xx| is deprecated (not compliant). Use |x| instead
- Range separator |*| is deprecated (not compliant). Use |x| instead
TemplateData
[మార్చు]TemplateData for Convert
Converts measurements to other units.
పరామితి | వివరణ | రకం | స్థితి | |
---|---|---|---|---|
Value | 1 | The value to convert. | సంఖ్య | తప్పనిసరి |
From unit | 2 | The unit for the provided value.
| స్ట్రింగు | తప్పనిసరి |
To units | 3 | The units to convert into. Separate units by a space for multiple outputs. In an output unit, use + for a multiplication space.
| స్ట్రింగు | సూచించినవి |
Precision or suffix | 4 | Significant digits after decimal dot or, if negative, exponent of ten. | సంఖ్య | ఐచ్చికం |
Link units | lk | Indication of what units to apply wikilinks to. Use “on” for all, “in” for the input unit, “out” for the output units, or “off” for none of the units. For more fine-grained control over which units to link, use the template multiple times.
| స్ట్రింగు | ఐచ్చికం |
Abbreviation | abbr | Display for the units: “on” to display all units using their unit symbols, “off” to display all units in full words, “in” to display the unit symbol for the input unit, “out” to display the unit symbols for the output units, “unit” to display unit symbols for both input and output units when using scientific notation, “values” for no units at all (neither unit symbols nor full words of units).
| స్ట్రింగు | సూచించినవి |
Spelling | sp | Spelling of units. Use “us” to display unit names using U.S. spelling.
| స్ట్రింగు | ఐచ్చికం |
Adjective | adj | Whether to use adjectival form. Use “on” for singular unit name appended by a hyphen, “mid” to put conversion at end, or “off” (default) for no adjectival form.
| అన్బ్యాలన్స్డ్ వికీటెక్స్టు | ఐచ్చికం |
Conversion | disp | Display conversion result: “or”: after ‘or’, “x”: with custom prefix and suffix, “b”: in parentheses, “table”/“tablecen”, “output only”: alone, “output number only”: alone and without unit, “unit”: not at all but input unit; if the value is a number it is used as precision.
| స్ట్రింగు | ఐచ్చికం |
Ordering | order | “flip” returns converted value first, input value second.
| స్ట్రింగు | ఐచ్చికం |
Significant figures | sigfig | Indicates the number of significant figures to be used in rounding. | సంఖ్య | ఐచ్చికం |
Rounding output | round | The type of rounding. “5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range. | సంఖ్య | ఐచ్చికం |
Thousands separator | comma | Sets or suppresses the use of thousands separators in the numbers. “off”: no separator; “gaps”: use space instead of comma as thousands separator; “5”: only add thousands separator when the integral part of the number uses 5 positions or more (10,000 or more; if using comma as thousands separator, 1234 would produce '1234', 12345 would produce '12,345').
| బూలియన్ | ఐచ్చికం |
Sort key | sortable | “on” generates a hidden sort key
| బూలియన్ | ఐచ్చికం |
Spell numbers? | spell | If used, spells input or input and output numbers in words, optionally capitalizing the first
| స్ట్రింగు | ఐచ్చికం |
Singular? | sing | If 'yes', uses singular form of units (deprecated)
| బూలియన్ | వాడుకలో లేదు |
Fraction? | frac | fraction as rounding unit | సంఖ్య | ఐచ్చికం |
Currency symbol | $ | sets currency symbol in both units
| స్ట్రింగు | ఐచ్చికం |
Mach altitude (ft) | altitude_ft | Mach (speed) depends on altitide
| సంఖ్య | ఐచ్చికం |
Mach altitude (m) | altitude_m | Mach (speed) depends on altitude | సంఖ్య | ఐచ్చికం |
WD property | input | Reads the property value of the item (article), then converts it
| స్ట్రింగు | ఐచ్చికం |